|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Anyone here Daisy-Chaining... posted by howard on March 12, 2012 at 10:46:39:
No PLC can address every issue plaguing power lines. As a result most PLC's address on certain specific issues. Some address certain aspects, which others may have neglected.
I used mine in an semi industrial area (zoned residential/commercial) so I faced a multitude of different issues. I used an MIT Z Stabilizer alone (I had three dedicated lines, all non black wiring with decent duplex outlets, all jumpered over between duplex outlets). I used a Shunyata only for my power amps. For the front end and digital I had a Tice model 4 (IIRC), modified, feeding A PS Audio 300, various VansEvers smaller units.
The key I found was that you need to isolate EERY component from each other.
Of course YMMV
Stu
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Yup - unclestu 16:06:04 03/12/12 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
