Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

RE: We don't want to talk about it with the type that hang out in Prop Heads.

That is NOT duplication. Duplication is to use exactly the SAME test equipment and exactly the same test conditions. It can be another unit, in a different location, but ALL conditions MUST be met. IF you don't, then all subsequent measurements are suspect. EVEN if the ORIGINAL test is somehow flawed, THEN the FLAW should be analyzed, but the results should not be rejected, by testing with completely different equipment, with different drive and grounding, and saying it is the same. It is NOT!
Steve, you are impossible to teach. I say this HERE, because I can. Somewhere else, I might be suspended, or worse, but it sure gets old. I might, for completeness, say that YOUR test cables were all very good, compared to some others that I have in my lab. EVEN the dirt cheap 'freebee' interconnects that you submitted. Had you been a more reasonable individual, I would have invited you to visit my lab and to help me find the source of this distortion difference between different wires. Alas, that was not to be, but I even today, with similar but DIFFERENT pieces of test equipment, I can roughly duplicate my initial results from 15 years ago.
Why this is so, is still as much a mystery to me, as to everyone else, but there it is!


This post is made possible by the generous support of people like you and our sponsors:
  The Cable Cooker  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.