|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Please help with selection of output caps posted by hukkfinn on May 31, 2009 at 07:56:08:
You may be getting a bit rolled off in the low frequencies. More C could be what you seek but....
If it were me, in order to avoid making more than one change at a time, I'd want to try a larger capacitance of the same technology, manufacturer, voltage and tolerance rating. If you have then determined you have solved the frequency response issues with a capacitance value change then go on to try and roll different manufacturers and technologies. But that may just be me.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Please help with selection of output caps - Ugly 23:13:35 06/01/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
