|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Hah! posted by unclestu52 on April 29, 2007 at 03:18:53:
Fortunately my Prem 11 warranty had looong been expired so i don't need to worry abouy voiding the warranty. I just want to tweak or update/upgrade some parts . After removing the top cover, i've noticed that the tube sockets are also quite dirty ( oxidized a bit ) and also some tubes are a bit loose. Maybe due to the aged tube sockets. Any recommendation of good tube sockets? ( ceramic or teflon types )Anyway , i tried to lay-out your suggested capacitor tweak. Is the schematic below correct ? There is a 18.2K connected on the ground leg of the bias pot which is connected to ground. So i just put the electrolytic cap in PARALLEL to the 18.2K resistor. Am i correct ?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Hah! - Jason Michael 06:30:49 04/29/07 (2)
- Re: Hah! - unclestu52 23:13:43 04/30/07 (1)
- Thanks for the tip !! - Jason Michael 10:40:29 05/01/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
