|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Those parts aren't half bad posted by Russ57 on February 4, 2007 at 05:21:46:
Russ, thanks you and also thanks for not "talking down" to someone who is not familiar with this stuff. I was also wondering how much one could stray from the values printed on the caps. I was having an "H" of a time finding ANY 200uF 40V caps. I like the idea of improving the quality, since I did that once on a pair of PSB, with guidance, and the results were just awesome - the character of the speakers idn't change, but the clarity was just much better, cleaner.The black cap on the left doesn't look electrolytic to me, looks like it is full of plastic (at least it hasn't metal tops like I am used to seeing). It measures 2 3/8" long and just under an inch in diameter.
You know you go to Lost Wages
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Those parts aren't half bad - 4yanx 08:56:14 02/04/07 (11)
- Re: Those parts aren't half bad - Russ57 12:03:03 02/04/07 (10)
- Re: Those parts aren't half bad - The Real Dick Hertz 14:51:35 02/04/07 (9)
- Look Again ! - djk 15:17:23 02/04/07 (8)
- Wait a minute! - The Real Dick Hertz 20:32:10 02/04/07 (6)
- Re: Wait a minute! - djk 22:53:06 02/04/07 (5)
- Comprende. - The Real Dick Hertz 15:33:30 02/05/07 (0)
- Now I understand - Russ57 04:04:07 02/05/07 (3)
- To me... - 4yanx 09:45:16 02/05/07 (2)
- There is no cheap solution other than electrolytics - Russ57 12:07:24 02/05/07 (0)
- Look for a lower-Voltage motor-run (NOT motor-START) cap. They're metallized 'propylenes... - jeffreybehr 10:08:56 02/05/07 (0)
- I fully understand... - 4yanx 15:54:32 02/04/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]