|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I am replacing the electrolytic caps and some of the signal caps in a Yamaha tuner. There is quite a few .01uf ceramic caps that I would like to change or upgrade. Some are used on two opamps, I imagine to shunt noise to ground. I have ready posts about what I should use but I am still confused. Should I use ceramic, mylar, Polypropolyn, etc. and where do I get them.
Thanks for any help.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Need Help on what .01uf bypass to use in my tuner - Mike16W 08:28:48 12/22/05 (7)
- Re: Need Help on what .01uf bypass to use in my tuner - moray james 16:50:05 12/22/05 (3)
- Re: Need Help on what .01uf bypass to use in my tuner - pkell44 18:24:55 12/23/05 (2)
- Re: Need Help on what .01uf bypass to use in my tuner - moray james 19:12:59 12/23/05 (1)
- Re: Need Help on what .01uf bypass to use in my tuner - pkell44 09:04:22 12/24/05 (0)
- Re: Need Help on what .01uf bypass to use in my tuner - pkell44 13:19:42 12/22/05 (0)
- Re: Need Help on what .01uf bypass to use in my tuner - djk 13:19:21 12/22/05 (1)
- Recommendations - Mmw 03:06:57 12/23/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
