|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Where to get Elna Silmic caps? posted by Carlos on March 30, 2005 at 18:29:20:
Thanks! My ears are quite sensitive to hardness and my Maggies are very revealing of it, so I really prefer smoother sounding components. I also listen to a lot of music with brass (e.g., Bruckner's symphonies) and it gets really fatigueing quickly if there's any hardness.These caps would be used for local opamp bypasses in an SS preamp, phono stage, and CDP analog output stage. The opamps are OPA627s and an LT1362 in the preamp. I'm thinking of a "Goudreau triplet," 100-200uF electolytic stacked with 0.01uF and 0.1-0.4uF SMD ceramics from V+/V- to ground, and/or Epcos B32560 uncoated stacked film caps between V+ and V-. The opamps are also biased with CRDs.
BTW, since you mentioned Jensens, do you have any experiences with / knowledge of Jensen 4-pole electrolytics for power supplies in SS gear?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Where to get Elna Silmic caps? - Sampsa 20:09:54 03/30/05 (2)
- Re: Where to get Elna Silmic caps? - Carlos 18:21:43 04/03/05 (1)
- Re: Where to get Elna Silmic caps? - Sampsa 18:44:03 04/03/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
