Home / FAQ / News
Classifieds / Events

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

Specialty Groups: Isolation Ward Tube DIY Asylum

Tech Square

Sponsored Links

VH Audio - Cables, Tweaks, Accessories and DIY Parts

Free Classifieds

Valvo EL84 (pair) - Byrd69

Any tips for applying DeoxIT Gold - ArdRi 11:39:16 03/06/08 (6)
- RE: Any tips for applying DeoxIT Gold - mg16 06:59:12 03/07/08 (0)
- RE: Any tips for applying DeoxIT Gold - FrankC 15:31:28 03/06/08 (3)
  - RE: Any tips for applying DeoxIT Gold - Awe-d-o-file 16:18:11 03/06/08 (2)
    - I wiped the excess as per Instructions - ArdRi 16:31:10 03/06/08 (1)
      - RE: I wiped the excess as per Instructions - Awe-d-o-file 08:44:49 03/07/08 (0)
- RE: Any tips for applying DeoxIT Gold - becketma@yahoo.com 14:46:42 03/06/08 (0)
Cable elevation works, but which cable elevators works best? - arildji 04:41:00 03/06/08 (22)
- RE: Wait for the New Acoustic Revive RCI-3 - NAL 14:33:32 03/11/08 (0)
- Proper DIY saves $$$ and works better. - Al Sekela 13:36:04 03/11/08 (0)
- A reviewers statement - arildji 11:56:28 03/09/08 (4)
  - RE: A reviewers statement - doak 21:51:57 03/09/08 (3)
    - RE: A reviewers statement - arildji 02:55:38 03/10/08 (2)
      - RE: A reviewers statement - David Aiken 13:44:22 03/10/08 (1)
        
        RE: A reviewers statement - arildji 14:41:24 03/10/08 (0)
- I did. Ceramics are better. - Norm 21:22:52 03/08/08 (0)
- Anyone hang their cables? - Dave Mester 20:20:24 03/07/08 (2)
  - RE: Anyone hang their cables? - rick_m 18:01:02 03/08/08 (0)
  - Yes, I have seen this done at the dealer I have linked below... - Steve Parry 07:08:39 03/08/08 (0)
- I have found the best are the Rightway Audio Suspenders, which may not be available now. - Norm 19:36:58 03/07/08 (0)
- I built my own - Mike B. 10:01:37 03/06/08 (1)
  - RE: I built my own - rwiley 19:49:52 03/06/08 (0)
- Mye elevators - 5maggies 08:45:31 03/06/08 (3)
  - RE: Mye elevators - arildji 09:17:45 03/06/08 (2)
    - I'm not sure the Shunyata conductive foam is all that expensive. - Al Sekela 15:49:19 03/06/08 (1)
      - RE: I'm not sure the Shunyata conductive foam is all that expensive. - andyr 03:50:03 03/21/08 (0)
- RE: Cable elevation works, but which cable elevators works best? - bartc 05:47:43 03/06/08 (3)
  - My idea was very similar! - FrankC 08:21:20 03/07/08 (1)
    - Yes, IMHO, height matters - bartc 08:29:31 03/07/08 (0)
  - RE: Cable elevation works, but which cable elevators works best? - Stephæn 08:16:10 03/06/08 (0)
2 new Acoustic Revive products launched - hotbird 01:57:43 03/06/08 (7)
- Acoustic Revive makes so many products, how would know where to start? - howard 15:34:35 03/10/08 (1)
  - My first Acoustic Revive purchases - hotbird 18:02:30 03/10/08 (0)
- REM-8 EMF Canceller - hotbird 02:07:45 03/06/08 (4)
  - New : REM-8 EMF Canceller Updates on website - hotbird 18:04:23 03/10/08 (1)
    - RE: New : REM-8 EMF Canceller Updates on website - audionutge@yahoo.com 04:19:17 03/11/08 (0)
  - RE: REM-8 EMF Canceller - eduardoo 05:59:16 03/06/08 (1)
    - Sorry should be EMI canceller, and not EMF(NT) - hotbird 08:06:07 03/06/08 (0)
acoustic panels - carter9000 21:30:34 03/05/08 (13)
- Yes you can. - Quiet Earth 13:14:29 03/14/08 (1)
  - RE: Yes you can. - carter9000 13:48:56 03/14/08 (0)
- RE: acoustic panels - David Aiken 22:43:29 03/05/08 (10)
  - RE: acoustic panels - carter9000 09:11:16 03/06/08 (9)
    - RE: acoustic panels - David Aiken 18:20:52 03/06/08 (8)
      - RE: acoustic panels - carter9000 18:46:23 03/06/08 (7)
        
        RE: acoustic panels - David Aiken 00:37:42 03/07/08 (6)
        
        RE: acoustic panels - carter9000 20:30:56 03/07/08 (5)
        
        If you use pre and /pre around your text things will be fine: - Ted Smith 16:52:19 03/09/08 (1)
        
        RE: If you use pre and /pre around your text things will be fine: - carter9000 18:44:51 03/09/08 (0)
        
        RE: acoustic panels - David Aiken 23:13:58 03/07/08 (1)
        
        RE: acoustic panels - carter9000 14:33:02 03/08/08 (0)
        
        RE: acoustic panels - carter9000 20:33:07 03/07/08 (0)
KingRex power supply & Acoustic Revive RR-77 are - satfrat 18:21:41 03/05/08 (14)
- KingRex power supply & Acoustic Revive RR-77 are - damon54@budlight.com 19:25:03 06/16/08 (0)
- RE: KingRex power supply & Acoustic Revive RR-77 are - satfrat 04:06:45 03/06/08 (6)
  - RE: KingRex power supply & Acoustic Revive RR-77 are - satfrat 11:18:24 03/06/08 (3)
    - RE: KingRex power supply & Acoustic Revive RR-77 are - NAL 07:14:22 03/07/08 (0)
    - RE: KingRex power supply & Acoustic Revive RR-77 are - posbwp55@msn.com 19:58:17 03/06/08 (1)
      - RE: KingRex power supply & Acoustic Revive RR-77 are - satfrat 21:15:18 03/06/08 (0)
  - Another thought, could you run two RR-77s off one KingRex power supply? - Norm 05:52:08 03/06/08 (1)
    - RE: Another thought, could you run two RR-77s off one KingRex power supply? - satfrat 11:07:56 03/06/08 (0)
- Thanks for the comments on the Kingrex - hotbird 01:02:48 03/06/08 (1)
  - RE: Thanks for the comments on the Kingrex - satfrat 03:13:34 03/06/08 (0)
- RE: KingRex power supply & Acoustic Revive RR-77 are - posbwp55@msn.com 22:40:51 03/05/08 (3)
  - RE: KingRex power supply & Acoustic Revive RR-77 are - satfrat 03:59:03 03/06/08 (2)
    - RE: KingRex power supply & Acoustic Revive RR-77 are - Stephæn 14:23:42 03/06/08 (1)
      - RE: KingRex power supply & Acoustic Revive RR-77 are - damon54@budlight.com 00:21:47 06/19/08 (0)
AuraT " Auricap- Teflon Capacitors" - ++++++++++++ - reb 11:00:45 03/05/08 (2)
- Specifics? - Jon L 11:32:34 03/05/08 (1)
  - RE: Specifics? - reb 11:56:16 03/05/08 (0)
Need help finding a varistor! - Joe Schmoe1143 07:40:51 03/05/08 (1)
- RE: Need help finding a varistor! - Glen B 11:28:00 03/05/08 (0)
Another buzz word - Ted in NJ 07:10:52 03/05/08 (6)
- RE: Another buzz word - Detailman 21:01:43 03/05/08 (0)
- RE: Another buzz word - rick_m 12:47:01 03/05/08 (1)
  - RE: Another buzz word - Ted in Nj 06:03:48 03/07/08 (0)
- RE: Another buzz word - Poindexter 08:26:23 03/05/08 (2)
  - RE: Another buzz word - Ted in NJ 08:44:41 03/05/08 (1)
    - RE: Another buzz word - chris_w 09:27:19 03/05/08 (0)
Can I upgrade PS capacitors. - mjcmt 05:51:58 03/05/08 (2)
- RE: Can I upgrade PS capacitors. - GTCharlie 16:57:58 03/05/08 (1)
  - I made a mistake on the cap value. - mjcmt 04:06:30 03/06/08 (0)
My comments on the EarthSafe Schumann Resonator - kavakidd 18:32:28 03/04/08 (6)
- RE: My comments on the EarthSafe Schumann Resonator - becketma@yahoo.com 19:42:47 03/08/08 (0)
- RE: My comments on the EarthSafe Schumann Resonator - benie 03:38:37 03/06/08 (0)
- Is it you or the audio system the device is affecting? - jea48 07:46:39 03/05/08 (1)
  - Thank you VERY much for the article - kavakidd 09:20:32 03/05/08 (0)
- RE: My comments on the EarthSafe Schumann Resonator - sherod 19:43:12 03/04/08 (1)
  - Yes - but be sure - kavakidd 21:43:25 03/04/08 (0)
Good non-WBT (i.e. cheaper) crimper for WBT sleeves? - krugorg 15:07:58 03/04/08 (0)
Need suggestions for umbilical wire - Tom 14:08:07 03/04/08 (2)
- RE: Need suggestions for umbilical wire - MichaelM 17:56:13 03/04/08 (0)
- RE: Need suggestions for umbilical wire - Sondek 14:54:23 03/04/08 (0)
Audiophile 6 outlet wall extension plate: Does one exists? - Dimitry 21:46:50 03/03/08 (0)
Unable to Identify, are these old DIY tube speakers? - choatpadda@earthlink.net 13:34:56 03/03/08 (3)
- Old Leak speakers ? maybe ? - chris_w 00:09:51 03/04/08 (0)
- Don't know about - unclestu52 17:30:05 03/03/08 (1)
  - RE: Don't know about - choatpadda@earthlink.net 22:33:14 03/03/08 (0)
Watch me simultaneously Open a Can of Worms while - ArdRi 11:55:20 03/03/08 (8)
- RE: Watch me simultaneously Open a Can of Worms while - David Aiken 12:31:07 03/03/08 (7)
  - OK,Thanks Let me elucidate if i can. - ArdRi 12:53:21 03/03/08 (6)
    - Two areas... - Al Sekela 15:04:42 03/03/08 (5)
      - Thanks. Honestly my problem may be insurmountable in that - ArdRi 15:24:40 03/03/08 (4)
        
        Small improvements may become larger when other noise sources are removed. - Al Sekela 10:15:59 03/04/08 (1)
        
        RE: Small improvements may become larger when other noise sources are removed. - Joseph Cohen 00:29:07 03/06/08 (0)
        
        RE: Thanks. Honestly my problem may be insurmountable in that - David Aiken 22:56:22 03/03/08 (0)
        
        The simple solution... - Djhymn 22:22:07 03/03/08 (0)
Same tube in parrallel... - slownlo 06:00:56 03/03/08 (5)
- Bigger problem - Chris O 08:33:06 03/04/08 (2)
  - Really? - cheap-Jack 09:34:28 03/04/08 (1)
    - RE: Really? - Chris O 12:59:05 03/04/08 (0)
- I see problems - Russ57 11:48:07 03/03/08 (0)
- I'd stick with the orignal twin tube driver design. - cheap-Jack 08:56:46 03/03/08 (0)
Clipsal 1439HD mains plug - Aussie members please note - dave c 19:12:00 03/02/08 (0)
Speaker crossover restoration... A question regarding soldering. - Kuja 17:41:54 03/02/08 (10)
- RE: Speaker crossover restoration... A question regarding soldering. - Kuja 18:19:05 03/03/08 (1)
  - RE: Speaker crossover restoration... A question regarding soldering. - Ron Oehlert 10:49:06 03/06/08 (0)
- RE: Speaker crossover restoration... A question regarding soldering. - kenster 17:01:19 03/03/08 (0)
- Buy a bigger soldering iron. - Al Sekela 15:11:18 03/03/08 (0)
- RE: Speaker crossover restoration... A question regarding soldering. - Dave Mester 09:06:04 03/03/08 (0)
- RE: Speaker crossover restoration... A question regarding soldering. - slownlo 06:18:49 03/03/08 (0)
- RE: Speaker crossover restoration... A question regarding soldering. - rafael 21:07:14 03/02/08 (1)
  - RE: Speaker crossover restoration... A question regarding soldering. - becketma@yahoo.com 20:05:25 03/06/08 (0)
- RE: Speaker crossover restoration... A question regarding soldering. - kh6idf 17:58:05 03/02/08 (1)
  - RE: Speaker crossover restoration... A question regarding soldering. - ACE_Vagi@yahoo.com 06:22:57 03/03/08 (0)
innersound amp mods - stator_99@yahoo.com 15:22:49 03/02/08 (1)
- Yes. - Al Sekela 10:01:40 03/03/08 (0)
Free audiophile tweak - Proper listening height - Audioquest4life 14:54:03 03/02/08 (3)
- RE: Free audiophile tweak - Proper listening height - endust4237 16:15:18 03/03/08 (0)
- RE: Free audiophile tweak - Proper listening height - William Schuchard 05:20:06 03/03/08 (0)
- Not realey a tweak - chris_w 16:56:07 03/02/08 (0)
Schuko wall socket - murali 08:07:55 03/02/08 (0)
Any Ideas to help with Oneac HF rolloff? - vred67 12:48:50 03/01/08 (6)
- RE: Any Ideas to help with Oneac HF rolloff? - kenster 12:58:29 03/02/08 (0)
- RE: Any Ideas to help with Oneac HF rolloff? - Duster 16:03:33 03/01/08 (0)
- Listening calibration required. - Al Sekela 14:48:41 03/01/08 (3)
  - Could you give some examples of how RF affects sound stage (nt) - clio09 06:24:17 03/02/08 (1)
    - My experience with RF noise and sound-stage. - Al Sekela 10:21:39 03/02/08 (0)
  - RE: Listening calibration required. - vred67 18:33:30 03/01/08 (0)
diy Bryston preamp power supply - oddmanout 08:18:01 03/01/08 (5)
- RE: diy Bryston preamp power supply - Bigromano 13:49:17 03/01/08 (4)
  - RE: diy Bryston preamp power supply - oddmanout 18:32:23 03/01/08 (3)
    - RE: diy Bryston preamp power supply - Bigromano 19:06:42 03/01/08 (2)
      - RE: diy Bryston preamp power supply - Bosteve 19:07:19 05/21/08 (0)
      - RE: diy Bryston preamp power supply - oddmanout 19:34:46 03/01/08 (0)
Building Speakers For High Powered Tube Amps - djdoctorp@comcast.net 14:58:07 02/29/08 (3)
- JBL - djk 16:08:55 02/29/08 (2)
  - Re-cone - djk 06:52:53 03/01/08 (0)
  - RE: JBL - djdoctorp@comcast.net 16:45:39 02/29/08 (0)
M. Percy website - wheezer 12:04:20 02/29/08 (2)
- RE: M. Percy website - machani 12:08:43 02/29/08 (1)
  - I've seen this posted before -time to "upgrade" for MP n/t - Awe-d-o-file 12:14:17 02/29/08 (0)
Digital Multi tester - Fatbosco 11:33:43 02/29/08 (3)
- RE: Digital Multi tester - mpathus 11:43:50 02/29/08 (2)
  - RE: Digital Multi tester - Fatbosco 12:18:44 02/29/08 (1)
    - RE: Digital Multi tester - mpathus 01:18:47 03/01/08 (0)
bobwire is retiring, so ask now! - bobwire 09:09:24 02/29/08 (8)
- RE: bobwire is retiring, so ask now! - Zombie 02:13:22 03/01/08 (0)
- RE: bobwire is retiring, so ask now! - Jose Garcia 13:28:59 02/29/08 (0)
- Good Luck Mr. N - Mike B. 10:47:17 02/29/08 (0)
- RE: Congrats! - DaveT 10:11:07 02/29/08 (0)
- They don't got no internets in Idaho? (nt) - mkuller 10:08:20 02/29/08 (3)
  - RE: They don't got no internets in Idaho? (nt) - bobwire 10:31:30 02/29/08 (2)
    - Acoustats as air cleaners... - moray james 11:32:53 02/29/08 (1)
      - RE: Acoustats as air cleaners... - bobwire 13:12:24 03/01/08 (0)
Anyone ever try Bluestone for an Equipment base? - ArdRi 00:02:48 02/29/08 (4)
- RE: Anyone ever try Bluestone for an Equipment base? - geoffkait 12:28:58 02/29/08 (0)
- Last time I encountered Bluestone was in army coffee... (nt) - DevillEars 08:00:37 02/29/08 (0)
- I had never heard of it. It is just sandstone from one area. Sandstone is not very hard. - Norm 07:19:17 02/29/08 (1)
  - I wondered about it because I'd heard harder stuff - ArdRi 11:15:04 02/29/08 (0)
Upgrade filter caps for Marantz 510 amp - Rowen 22:29:32 02/28/08 (3)
- RE: Upgrade filter caps for Marantz 510 amp - djk 02:45:54 02/29/08 (0)
- RE: Upgrade filter caps for Marantz 510 amp - GTCharlie 00:28:34 02/29/08 (0)
- RE: Upgrade filter caps for Marantz 510 amp - Ron Oehlert 22:35:08 02/28/08 (0)
Anyone know the voltage spec for 47 Labs PSU? - il toro 15:25:34 02/28/08 (2)
- RE: Anyone know the voltage spec for 47 Labs PSU? - Ron Oehlert 01:20:35 02/29/08 (1)
  - He's in Italy I'm in the UK - il toro 05:22:37 02/29/08 (0)
Anyone done a dummy load on their dig out? - Awe-d-o-file 14:41:48 02/28/08 (1)
- RE: Anyone done a dummy load on their dig out? - David Aiken 15:50:09 02/28/08 (0)
I ordered two sheets of Isodamp 9" x12" - ArdRi 11:14:25 02/28/08 (9)
- RE: I ordered two sheets of Isodamp 9" x12" - Square Peg 19:27:44 02/28/08 (8)
  - RE: I ordered two sheets of Isodamp 9" x12" - Steve Eddy 08:41:13 02/29/08 (5)
    - RE:Welll - Square Peg 14:00:20 02/29/08 (4)
      - RE:Welll - Steve Eddy 18:24:20 02/29/08 (3)
        
        I assumed Isodamp had an adhesive back - ArdRi 00:05:46 03/01/08 (2)
        
        Depends on the type of Isodamp... - Steve Eddy 10:16:49 03/01/08 (1)
        
        I received them today from Prelude Audio - ArdRi 10:37:21 03/01/08 (0)
  - Did you use any ERS sheets or pieces? n/t - ArdRi 21:39:35 02/28/08 (1)
    - RE: Nope. I'm a dinosaur. - Square Peg 23:16:29 02/28/08 (0)
Power Supply Cap Upgrade - ACE_Vagi@yahoo.com 05:44:06 02/28/08 (1)
- RE: Power Supply Cap Upgrade - DaveT 17:02:43 02/28/08 (0)
inductor winding - waltr 19:35:10 02/27/08 (2)
- RE: inductor winding - Ron Oehlert 22:48:12 02/28/08 (1)
  - RE: inductor winding - waltr 19:52:47 02/29/08 (0)
Where are these Caps so I can Perform this simple Mod? - mjcmt 07:22:46 02/27/08 (6)
- Asylum Sponsor Michael Percy Audio. - Poindexter 08:16:15 02/27/08 (5)
  - RE: Funny! Intentional? nt - Square Peg 22:56:57 02/27/08 (4)
    - Not intentional. How, funny? - Poindexter 08:20:27 02/28/08 (3)
      - RE: Not intentional. How, funny? - Square Peg 14:19:45 02/28/08 (2)
        
        Oh, dear. - Poindexter 18:11:11 02/28/08 (1)
        
        RE: Oh, dear. - mjcmt 03:53:01 03/04/08 (0)
12VDC power supply for Cyberlights - randallt 16:18:58 02/25/08 (4)
- RE: 12VDC power supply for Cyberlights - Glen B 18:12:55 02/26/08 (0)
- deep cycle marine battery - Chris O 07:42:49 02/26/08 (2)
  - RE: deep cycle marine battery - Door Nail 11:02:41 02/26/08 (0)
  - RE: deep cycle marine battery - randallt 08:20:05 02/26/08 (0)
MF Nuvista M3 Schematics + Upgrades - ACE_Vagi@yahoo.com 08:47:49 02/25/08 (3)
- RE: MF Nuvista M3 Schematics + Upgrades - sailor321 12:32:38 02/25/08 (2)
  - RE: MF Nuvista M3 Schematics + Upgrades - zanash 23:33:07 02/25/08 (1)
    - RE: MF Nuvista M3 Schematics + Upgrades - ACE_Vagi@yahoo.com 09:40:19 02/27/08 (0)
Must have tweek - Jeff Davison 23:59:21 02/24/08 (13)
- RE: A Rockwell Incident? nt - quirck 00:45:36 02/28/08 (0)
- That's the job I should've been doing my whole life (nt) - author@escapeclause.net 19:15:16 02/27/08 (0)
- Here is some background... - maabx 07:49:52 02/27/08 (2)
  - Dang it...,. - bevo 18:56:12 02/27/08 (1)
    - And it's not even April Fool's Day! Shame, shame, shame. -t - maabx 05:29:52 02/28/08 (0)
- ROFLMAO... - kenster 07:06:24 02/27/08 (0)
- You can get.... - pburant 20:50:11 02/26/08 (0)
- Dang, my ignorance is showing - bevo 16:32:15 02/26/08 (0)
- Is there a version in english? My gibberish is lacking...N/T - musetap 21:32:30 02/25/08 (0)
- Improved version - Jeff Davison 12:38:22 02/25/08 (0)
- That's hilarious... - sherod 11:16:16 02/25/08 (2)
  - Fact or Fiction? - mjcmt 07:31:59 02/27/08 (0)
  - Fact or Fiction? - mjcmt 07:34:55 02/27/08 (0)
Car Subwoofer to Computer/TV Subwoofer - pmenefee 12:27:46 02/24/08 (2)
- A driver's a driver - pburant 19:51:22 02/24/08 (1)
  - What he said... - RickeyM 05:48:41 02/25/08 (0)
Hi Fi Fuses? - becketma@yahoo.com 21:50:10 02/23/08 (18)
- RE: Hi Fi Fuses?-I just changed out 4 of them.... - mitch2 21:31:17 02/24/08 (16)
  - RE: Hi Fi Fuses?-I just changed out 4 of them.... - becketma@yahoo.com 23:04:09 03/05/08 (4)
    - RE: Hi Fi Fuses?-I just changed out 4 of them.... - DeanSheen 09:51:26 03/06/08 (3)
      - RE: Hi Fi Fuses?-I just changed out 4 of them.... - becketma@yahoo.com 15:01:09 03/06/08 (2)
        
        Yes there is a difference - DeanSheen 06:34:59 03/11/08 (1)
        
        RE: Yes there is a difference - becketma@yahoo.com 16:10:43 03/12/08 (0)
  - RE: Hi Fi Fuses?-I just changed out 4 of them.... - PaulDB 17:16:17 02/25/08 (9)
    - RE: Hi Fi Fuses?-I just changed out 4 of them.... - mitch2 20:00:12 02/25/08 (8)
      - RE: Hi Fi Fuses?-direction? - HumanMedia 02:11:17 02/26/08 (7)
        
        Just one more thing for an audiophile to do..... - mitch2 16:00:01 02/26/08 (6)
        
        RE: Just one more thing for an audiophile to do..... - becketma@yahoo.com 11:54:00 03/01/08 (0)
        
        Or buy the IsoCleans which are better, cheaper, and have direction marked. nt - Norm 20:22:55 02/26/08 (4)
        
        How are they "better" . - ArdRi 23:17:13 02/27/08 (3)
        
        I don't understand, but I guess you want me to say they sound better. - Norm 16:39:59 02/28/08 (2)
        
        No. I want you to say what you experienced - ArdRi 12:03:40 03/01/08 (1)
        
        Much to my surprise as I like silver and the HiFi Tuning fuses are silver, I found them open and dynamic than - Norm 21:46:44 03/01/08 (0)
  - RE: Hi Fi Fuses?-I just changed out 4 of them.... - becketma@yahoo.com 22:28:10 02/24/08 (0)
- If wire matters.... - pburant 19:53:46 02/24/08 (0)
Aurios Pro Max question.. - Sordidman 18:03:51 02/23/08 (13)
- RE: Shouldn't the Aurios be a supplement... - G man 19:46:49 02/23/08 (12)
  - RE: Shouldn't the Aurios be a supplement... - David Aiken 00:23:38 02/24/08 (8)
    - Don't Stillpoints isolate in both planes? - howard 14:15:11 02/28/08 (2)
      - And let's not forget rotational directions. There are 3 of those. nt - geoffkait 05:45:13 02/29/08 (0)
      - RE: Don't Stillpoints isolate in both planes? - David Aiken 15:47:28 02/28/08 (0)
    - Hey David, thanks for your comments - Sordidman 09:08:29 02/24/08 (3)
      - Aurios 1.0 & BDR Mk4 cones - randallt 16:11:03 02/25/08 (0)
      - RE: Hey David, thanks for your comments - David Aiken 12:57:57 02/24/08 (1)
        
        Sure, experimentation is important.. - Sordidman 10:04:21 02/25/08 (0)
    - RE: Thanks for the added info and reference. nt - G man 08:04:39 02/24/08 (0)
  - Thanks for that information - Sordidman 20:17:02 02/23/08 (2)
    - RE: Thanks for that information - G man 20:51:59 02/23/08 (1)
      - RE: Thanks for that information - David Aiken 13:04:42 02/24/08 (0)
Dedicated Lines Research, Part 2 - Coffeecupman 09:16:57 02/23/08 (16)
- Excellent questions all! nt - clarkjohnsen 12:43:51 02/25/08 (0)
- RE: Dedicated Lines - unclestu52 14:29:20 02/23/08 (6)
  - RE: Dedicated Lines - Coffeecupman 09:25:56 02/26/08 (0)
  - RE: Dedicated Lines - Robo02 13:10:43 02/25/08 (1)
    - RE: Dedicated Lines - unclestu52 11:58:15 02/26/08 (0)
  - RE: Dedicated Lines - Pooge 15:50:50 02/23/08 (2)
    - Judge for yourself - unclestu52 20:04:33 02/23/08 (0)
    - Judge for yourself - unclestu52 20:05:30 02/23/08 (0)
- Don't worry about the balance of load currents. - Al Sekela 13:34:53 02/23/08 (4)
  - RE: Don't worry about the balance of load currents. - ItsAllGood 07:15:10 02/27/08 (1)
    - The problem is the third conductor. - Al Sekela 11:03:19 02/27/08 (0)
  - RE: Don't worry about the balance of load currents. - Coffeecupman 09:11:14 02/26/08 (1)
    - I like the idea of re-routing the mains. - Al Sekela 10:57:38 02/27/08 (0)
- RE: Dedicated Lines Research, Part 2 - tvi 12:42:48 02/23/08 (2)
  - Great article, thanks! (nt) - Al Sekela 11:16:00 02/27/08 (0)
  - Now that's a Tweak!!!!! - Barry 18:10:55 02/23/08 (0)
does anyone like Underwood do Naim mods? - author@escapeclause.net 09:09:21 02/23/08 (1)
- RE: does anyone like Underwood do Naim mods? - welly 14:13:12 02/25/08 (0)
Acoustic Revive RR-77 upgraded power supplys - satfrat 01:39:55 02/23/08 (10)
- RE: Acoustic Revive RR-77 upgraded power supplys - GGA 11:19:23 02/24/08 (5)
  - I found my Metronome ps. It has a 7 pin connector. - Norm 12:55:33 02/24/08 (3)
    - RE: I found my Metronome ps. It has a 7 pin connector. - satfrat 14:02:02 02/24/08 (2)
      - Yes, I guess I could find which is +12 volts and ground and change the connector. nt - Norm 20:31:28 02/24/08 (1)
        
        RE: Yes, I guess I could find which is +12 volts and ground and change the connector. nt - satfrat 21:18:30 02/24/08 (0)
  - RE: Acoustic Revive RR-77 upgraded power supplys - satfrat 11:50:53 02/24/08 (0)
- like this perhaps.... - David Clark 09:46:13 02/24/08 (3)
  - RE: like this perhaps.... - satfrat 11:07:54 02/24/08 (2)
    - RE: like this perhaps.... - mwyatt@audio-magus.com 10:03:57 02/25/08 (1)
      - RE: like this perhaps.... - satfrat 10:34:07 02/25/08 (0)
Does it matter if your outlet left scratch marks on your AC plugs? - bkst140 21:16:23 02/22/08 (1)
- Not an expert but - bartc 21:55:33 02/22/08 (0)
ps audio / oyaide mod - stator_99@yahoo.com 17:24:34 02/22/08 (5)
- RE: ps audio / oyaide mod - kenster 00:06:28 02/23/08 (0)
- They ain't gonna fit on the PPP without case rework - Cappy 19:29:46 02/22/08 (2)
  - I last posted on the PS Mods Forum in Oct about this - dusted 13:57:52 02/23/08 (1)
    - If you just want one or two outlets changed... - Cappy 15:38:41 02/23/08 (0)
- I wondered about that for my Duet when I saw - ArdRi 17:46:55 02/22/08 (0)
Help! IC pin stuck in amp input - Nglazer 12:45:58 02/22/08 (5)
- RE: Help! IC pin stuck in amp input - Nglazer 10:43:35 02/25/08 (0)
- RE: Help! IC pin stuck in amp input - JimBop 18:30:41 02/22/08 (0)
- RE: Help! IC pin stuck in amp input - Awe-d-o-file 13:02:09 02/22/08 (2)
  - RE: Help! IC pin stuck in amp input - Nglazer 15:55:29 02/22/08 (1)
    - RE: Help! IC pin stuck in amp input - zanash 03:55:19 02/24/08 (0)
disabling output of tube amp - frank 11:27:18 02/21/08 (7)
- RE: disabling output of tube amp - frank 08:47:26 02/22/08 (0)
- RE: disabling output of tube amp - Door Nail 02:31:02 02/22/08 (1)
  - RE: disabling output of tube amp - unclestu52 11:19:16 02/22/08 (0)
- RE: disabling output of tube amp - Chris O 12:01:57 02/21/08 (3)
  - Hmmm..... - unclestu52 00:28:45 02/22/08 (2)
    - RE: Hmmm..... - Chris O 07:36:36 02/22/08 (1)
      - RE: Hmmm..... - frank 09:34:41 02/22/08 (0)
Vibration control shelf for Power Line Conditioner - posbwp55@msn.com 11:08:11 02/21/08 (9)
- RE: Vibration control shelf for Power Line Conditioner - satfrat 02:55:02 02/23/08 (3)
  - "Isobloacks" - dave c 04:04:02 02/23/08 (2)
    - Give them time... they don't like to be seen to be forming a group! nt - dave c 03:35:14 02/24/08 (0)
    - RE: "Isobloacks" - satfrat 04:21:26 02/23/08 (0)
- RE: Vibration control shelf for Power Line Conditioner - stator_99@yahoo.com 16:44:42 02/22/08 (0)
- RE: Vibration control shelf for Power Line Conditioner - Fatbosco 08:29:29 02/22/08 (0)
- RE: Vibration control shelf for Power Line Conditioner - unclestu52 18:12:42 02/21/08 (0)
- It is a trial and error question. You will have to experiment. - Norm 12:23:04 02/21/08 (0)
- RE: Vibration control shelf for Power Line Conditioner - Jack G 11:27:23 02/21/08 (0)
Ways to warm up and smooth the sound of my Audio Research SP9 ? - mjeeves 09:29:41 02/21/08 (14)
- Let's see, you've only posted this in THREE forums so far... - Ozzy 09:20:15 02/22/08 (0)
- "...I just find the SP9 a bit thin, cold and glare-y. ?? - cdb 20:21:24 02/21/08 (0)
- RE: Ways to warm up and smooth the sound of my Audio Research SP9 ? - reb 15:18:07 02/21/08 (0)
- If it was me - I'd start by callig or emailing - kavakidd 14:03:47 02/21/08 (0)
- What is the rest of your system? (nt) - mkuller 10:59:59 02/21/08 (0)
- RE: Ways to warm up and smooth the sound of my Audio Research SP9 ? - astralpen 10:54:25 02/21/08 (0)
- RE: Ways to warm up and smooth the sound of my Audio Research SP9 ? - Cpk 10:00:32 02/21/08 (1)
  - Agree!!!!! - pacevir@yahoo.com 19:41:59 02/21/08 (0)
- How do you have it supported? - pburant 09:43:09 02/21/08 (5)
  - RE: How do you have it supported? - mjeeves 09:47:37 02/21/08 (4)
    - Tube Dampeners? - pburant 11:26:23 02/21/08 (0)
    - RE: How do you have it supported? - Paul_A 11:12:32 02/21/08 (2)
      - RE: How do you have it supported? - mjeeves 09:10:59 02/22/08 (1)
        
        RE: How do you have it supported? - Paul_A 10:42:40 02/22/08 (0)
Australian AC power connector - MichaelM 21:55:46 02/20/08 (2)
- RE: Australian AC power connector - HumanMedia 14:11:48 02/21/08 (1)
  - RE: Australian AC power connector - MichaelM 16:02:53 02/21/08 (0)
Miniature coax for internal cabling of amps, preamps, etc. - revisited - andy_c 17:34:50 02/20/08 (1)
- VH Pulsar? - RioTubes 08:17:53 02/21/08 (0)
I would like to turn an older Synergistic Research in to active. - Odyno 17:15:57 02/20/08 (1)
- RE: I would like to turn an older Synergistic Research in to active. - kenster 23:19:45 02/20/08 (0)
Absorbing vibration - Dawnrazor 12:55:04 02/20/08 (21)
- RE: Absorbing vibration - Toyman 12:49:30 02/26/08 (1)
  - RE: Absorbing vibration - Dawnrazor 19:43:50 02/27/08 (0)
- Yes, mass is a key issue. - cheap-Jack 07:34:01 02/21/08 (1)
  - RE: Yes, mass is a key issue. - Dawnrazor 20:52:48 02/21/08 (0)
- What I did - bartc 17:58:09 02/20/08 (2)
  - None of the links worked - Dawnrazor 20:58:01 02/21/08 (1)
    - not the best pix - bartc 16:54:38 02/22/08 (0)
- RE: Absorbing vibration - Ted Smith 14:23:52 02/20/08 (0)
- RE: Absorbing vibration - pburant 13:50:52 02/20/08 (9)
  - RE: Absorbing vibration - Dawnrazor 14:11:02 02/20/08 (8)
    - RE: Absorbing vibration - pburant 14:21:28 02/20/08 (7)
      - sand another thing... - dave c 15:10:47 02/20/08 (6)
        
        Polyester Batting.... - pburant 17:44:03 02/20/08 (5)
        
        ahhh yes, but is this a photo of a party at your place? - dave c 03:56:50 02/21/08 (4)
        
        Had I known.... - pburant 06:16:24 02/21/08 (3)
        
        I don't think I am paranoid enough, but hang on... - dave c 19:53:30 02/21/08 (2)
        
        You looked better in antlers (!txt) - pburant 11:29:54 02/22/08 (1)
        
        those were room tuners! nt - dave c 12:19:58 02/22/08 (0)
- I have used... - clio09 13:50:32 02/20/08 (2)
  - RE: I have used... - Dawnrazor 14:12:04 02/20/08 (1)
    - I like it better than sand... - clio09 14:19:36 02/20/08 (0)
Jena Labs Hubbell vs. Oyaide R1 - Chuck 10:59:16 02/20/08 (4)
- thanks, folks! (nt) - Chuck 11:31:05 02/21/08 (0)
- RE: Jena Labs Hubbell vs. Oyaide R1 - Quint 16:40:59 02/20/08 (1)
  - RE: Jena Labs Hubbell vs. Oyaide R1 - yo2tup 15:37:21 02/21/08 (0)
- Good is good regardless of the system. The IsoClean is clearly better than the Jena - Norm 13:38:38 02/20/08 (0)
What is the tolerance built into Black Gate caps for voltage? I want to use. . - John PA 15:15:28 02/19/08 (9)
- And what about your AC ripple voltage? - Russ57 15:39:11 02/20/08 (1)
  - Love those motor run caps and yes it was years ago but. . . - John PA 17:22:18 02/20/08 (0)
- Bad Idea - Mike B. 08:40:40 02/20/08 (2)
  - You are right and normally for higher voltage applications like this. . - John PA 12:33:04 02/20/08 (1)
    - I doubt you would notice a difference - Mike B. 08:11:26 02/21/08 (0)
- RE: What is the tolerance built into Black Gate caps for voltage? I want to use. . - tszeking.cheng@homecall.co.uk 16:35:07 02/19/08 (3)
  - RE: What is the tolerance built into Black Gate caps for voltage? I want to use. . - GTCharlie 17:58:46 02/19/08 (2)
    - RE: What is the tolerance built into Black Gate caps for voltage? I want to use. . - John PA 20:27:10 02/19/08 (1)
      - Surge - djk 05:44:31 02/20/08 (0)
pinging Jon Risch on subject of tri-corner traps - author@escapeclause.net 12:35:43 02/19/08 (10)
- RE: pinging Jon Risch on subject of tri-corner traps - Jon Risch 20:44:47 02/20/08 (9)
  - Thank you, Jon, as always; follow-up questions: - author@escapeclause.net 06:33:18 02/21/08 (8)
    - RE: Thank you, Jon, as always; follow-up questions: - Jon Risch 10:29:17 02/21/08 (7)
      - Won't the cardboard affect performance? - author@escapeclause.net 09:11:26 02/23/08 (6)
        
        RE: Won't the cardboard affect performance? - Jon Risch 19:57:05 02/24/08 (5)
        
        Jon Risch and David Aiken for President and Veep - author@escapeclause.net 20:03:26 02/24/08 (4)
        
        Jon for both… - David Aiken 21:59:35 02/24/08 (3)
        
        RE: Jon for both… - DeanSheen 07:14:18 02/28/08 (2)
        
        RE: Jon for both… - Jon Risch 17:05:19 02/28/08 (1)
        
        RE: Jon for both… - DeanSheen 18:06:36 02/28/08 (0)
Why Power Conditioners Are Necessary (pic) - 1973shovel 06:10:49 02/19/08 (12)
- It looks like they are in great condition already! - Julien43 02:43:07 02/20/08 (1)
  - RE: It looks like they are in great condition already! - author@escapeclause.net 05:49:43 02/20/08 (0)
- That's hilarious######### - Detailman 20:57:18 02/19/08 (0)
- Marvelous! Thanks!...N/T - musetap 10:53:17 02/19/08 (0)
- ROFLMAO... - kenster 07:12:36 02/19/08 (0)
- RE: Why Power Conditioners Are Necessary (pic) - Duster 06:42:46 02/19/08 (5)
  - When I was in elementary school, someone put some pins in an eraser... - Steve Parry 13:26:28 02/20/08 (0)
  - That ain't how I used to do it - bevo 08:38:44 02/19/08 (3)
    - RE: That ain't how I used to do it - markC 19:27:08 02/19/08 (2)
      - I didn't use no stinken outlet I used. . . - John PA 20:49:46 02/19/08 (1)
        
        RE: I didn't use no stinken outlet I used. . . - Timmy 01:30:43 02/28/08 (0)
- Thank you!!!!!!!!!!!!!!!!!!!!!!!! - Don.Walker 06:41:17 02/19/08 (0)
Newbie wants to know about a New Toroidal Transformer - bradleyssmith@hotmail.com 22:02:58 02/18/08 (6)
- The trampoline effect... - Al Sekela 11:22:57 02/19/08 (0)
- RE: Newbie wants to know about a New Toroidal Transformer - XTRProf 02:43:54 02/19/08 (0)
- RE: Newbie wants to know about a New Toroidal Transformer - XTRProf 23:55:49 02/18/08 (3)
  - RE: Newbie wants to know about a New Toroidal Transformer - bradleyssmith@hotmail.com 00:32:42 02/19/08 (2)
    - RE: Newbie wants to know about a New Toroidal Transformer - GTCharlie 18:13:06 02/19/08 (1)
      - RE: Newbie wants to know about a New Toroidal Transformer - bssmith 19:13:32 02/19/08 (0)
Power supply - xaudiomanx@aol.com 19:24:32 02/18/08 (1)
- RE: Power supply - XTRProf 00:01:01 02/19/08 (0)
Driver X-over swap on large MTX speakers. - dave123456@mail.com 15:58:28 02/18/08 (3)
- RE: Driver X-over swap on large MTX speakers. - Duster 07:43:25 02/19/08 (0)
- RE: Driver X-over swap on large MTX speakers. - Ron Oehlert 07:09:47 02/19/08 (1)
  - RE: Driver X-over swap on large MTX speakers. - dave123456@mail.com 14:40:52 02/23/08 (0)
Absorbing AC turntable motor vibrations - GGA 11:56:26 02/18/08 (9)
- RE: Absorbing AC turntable motor vibrations - oldman43 09:16:56 02/20/08 (0)
- Mark Kelly's AC-1 controller - BobM 06:25:49 02/19/08 (2)
  - RE: Mark Kelly's AC-1 controller - Dave Garretson 06:54:55 02/20/08 (0)
  - RE: Mark Kelly's AC-1 controller - XTRProf 03:25:10 02/20/08 (0)
- RE: Absorbing AC turntable motor vibrations - XTRProf 03:18:42 02/19/08 (0)
- RE: Absorbing AC turntable motor vibrations - kenster 12:43:59 02/18/08 (2)
  - RE: Absorbing AC turntable motor vibrations - GGA 13:10:53 02/18/08 (1)
    - RE: Absorbing AC turntable motor vibrations - kenster 15:54:31 02/18/08 (0)
- RE: Absorbing AC turntable motor vibrations - Tweekeng 12:36:29 02/18/08 (0)
Mounting direction Mundorf silver/oil ? - up 09:09:42 02/18/08 (1)
- RE: Mounting direction Mundorf silver/oil ? - GTCharlie 18:22:01 02/19/08 (0)
Tweakers invited to respond... - author@escapeclause.net 08:38:48 02/17/08 (2)
- RE: Tweakers invited to respond... - XTRProf 03:30:52 02/19/08 (0)
- RE: Tweakers invited to respond... - becketma@yahoo.com 18:18:03 02/17/08 (0)
Walker High definition Link II and polarity hook up - ssand1 06:08:21 02/17/08 (8)
- RE: Walker High definition Link II and polarity hook up - kenster 19:47:34 02/17/08 (6)
  - Good point Kenster. Lloyd Walker is a very nice guy... - cdc 10:14:26 02/18/08 (5)
    - RE: Good point Kenster. Lloyd Walker is a very nice guy... - ssand1 18:05:49 02/19/08 (0)
    - RE: Good point Kenster. Lloyd Walker is a very nice guy... - XTRProf 00:05:20 02/19/08 (3)
      - RE: Good point Kenster. Lloyd Walker is a very nice guy... - cdc 09:58:03 02/19/08 (2)
        
        RE: Good point Kenster. Lloyd Walker is a very nice guy... - XTRProf 03:32:15 02/20/08 (1)
        
        RE: Good point Kenster. Lloyd Walker is a very nice guy... - cdc 08:22:05 02/20/08 (0)
- Follow the polarity of the speaker cables and preamp...nt - cdc 08:18:34 02/17/08 (0)
REVIEW: HiFi-Tuning Fuse Accessory - oofer 15:59:16 02/16/08 (24)
- RE: (strong)REVIEW: HiFi-Tuning Fuse Accessory(/strong) - Wira 02:59:31 02/21/08 (1)
  - RE: (strong)REVIEW: HiFi-Tuning Fuse Accessory(/strong) - Jurgen 01:10:50 03/05/08 (0)
- RE: (strong)REVIEW: HiFi-Tuning Fuse Accessory(/strong) - Robo02 14:34:30 02/19/08 (0)
- HiFi-Tuning Fuse Accessory - PADIS - MikeFi 12:45:01 02/18/08 (0)
- RE: (strong)REVIEW: HiFi-Tuning Fuse Accessory(/strong) - TonyA 16:02:57 02/17/08 (1)
  - Most changes result in change, plus or minus - oofer 18:43:29 02/18/08 (0)
- I also tried the HIFI-Tuning fuse in my VAC Monoblocs... - sherod 09:43:26 02/17/08 (3)
  - Break in - oofer 18:49:10 02/18/08 (0)
  - At some point try reversing their direction. Despite what they say, I found them directional. nt - Norm 12:12:24 02/17/08 (1)
    - RE: At some point try reversing their direction. Despite what they say, I found them directional. nt - sherod 12:36:54 02/17/08 (0)
- RE: (strong)REVIEW: HiFi-Tuning Fuse Accessory(/strong) - greg7 05:27:08 02/17/08 (13)
  - This is my experience also. nt - Norm 08:05:36 02/17/08 (12)
    - Norm and Greg, Have Either of You... - Cappy 09:41:51 02/17/08 (11)
      - RE: Norm and Greg, Have Either of You... - Seán 01:40:46 02/18/08 (3)
        
        RE: Norm and Greg, Have Either of You... - Audioquest4life 11:38:13 02/18/08 (0)
        
        I wonder if this is just the old silver versus copper conundrum. nt - Norm 06:54:22 02/18/08 (1)
        
        RE: I wonder if this is just the old silver versus copper conundrum. nt - Seán 08:03:57 02/18/08 (0)
      - I was unaware of them. Copper element and endcaps. Sound like IsoClean - Norm 12:37:26 02/17/08 (2)
        
        Isocleans are slow-blow - greg7 13:21:05 02/17/08 (1)
        
        Yes. But they don't look like most slow blows. nt - Norm 14:13:46 02/17/08 (0)
      - Do they have an English version ad on Ebay?... - sherod 09:48:17 02/17/08 (3)
        
        RE: Do they have an English version ad on Ebay?... - muser 11:33:56 02/20/08 (0)
        
        RE: Do they have an English version ad on Ebay?... - Cappy 10:00:52 02/17/08 (1)
        
        Most ceramic bodies are slow blow... - sherod 10:10:48 02/17/08 (0)
Where might one begin if they wanted to Modify - ArdRi 20:22:43 02/16/08 (7)
- read, build (and re-build) some kits, then mod - PSP 13:25:05 02/17/08 (1)
  - Super Idea,thanks. Great resource lead to more. - ArdRi 13:53:02 02/17/08 (0)
- RE: Where might one begin if they wanted to Modify - zanash 01:10:16 02/17/08 (4)
  - RE: Where might one begin if they wanted to Modify - Dman 11:01:15 02/17/08 (1)
    - I've never had cause to know and assumed - ArdRi 11:12:56 02/17/08 (0)
  - That's a step in the right direction but still - ArdRi 10:49:48 02/17/08 (0)
  - RE: Where might one begin if they wanted to Modify - Dman 06:16:09 02/17/08 (0)

Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.
Threads started on or before 1/31/07 are archived Here.
Threads started on or before 01/13/07 are archived Here.