|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: Hi Mikey, and thanks for your input. Some questions? posted by Michael Samra on June 6, 2016 at 20:27:37:
Their current state is a reflection of a previous plan using a three sphere stack with a Manger driver from Germany in the middle smaller sphere running from 150Hz @ 1st order with the two bass spheres tried at 3rd and 1st for LPass.
But the idea of a 1st HP & 3rd LP crossover works quite well with dipole planars, too.
I will go with both the LEAKs in Pentode. I should then have about 40 watts pc into the 63s, and with the 150Hz high pass that should be just enough power. We will just add a 4th PSU cap to the one with just three.
We aren't using 12AX7s anywhere in the LEAKs. The shared input valve is a 6DJ8 and the drivers are 6CG7s with a FET CCS. See URL below my signature block.
Warmest
Tim Bailey
Skeptical Measurer & Audio Scrounger
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Hi Mike, The main system isn't running anyway. - Timbo in Oz 22:46:19 06/06/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]