Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Sovtek 2A3 how much filament glow? posted by DAK on April 11, 2016 at 19:25:47:
Realize that the 2A3 uses 2.5 Volts to run the filament. Is your 45 VDC measuring from the pins to ground (i.e. across the bias resistor?) If your tube is warm it is probably due to the filament. Look at the tube with 2.5 volts on the filament. There is not much glow visible from the Sovtek because the plate hides it..
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Sovtek 2A3 how much filament glow? - Chip647 20:21:19 04/12/16 (0)