Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
I'm using a Yamaha RX-A820 as a preamp. I have a Radio Craftsmen CA-11 Concerto (10w mono PP) I have used as a center channel in the past with an AVR that output 2v. Newer Yamahas output 1v. So the center is more than 10db below the other channels, plus plenty of hisssss on a Klipsch KG 2.2.
Any ideas on a line stage or even line driver? Decware makes a line stage for $649, but I'm not willing to spend that much.
It was refurbished by Don Allen, and it's a shame to have it sitting unused.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Low Preamp Voltage - ske 09:32:56 02/14/16 (6)
- RE: Low Preamp Voltage - Caucasian Blackplate 11:27:38 02/14/16 (4)
- RE: Low Preamp Voltage - ske 11:49:42 02/14/16 (3)
- RE: Low Preamp Voltage - Caucasian Blackplate 12:25:40 02/14/16 (2)
- RE: Low Preamp Voltage - ske 12:37:25 02/14/16 (1)
- RE: Low Preamp Voltage - Caucasian Blackplate 12:40:03 02/14/16 (0)
- RE: Low Preamp Voltage - Eli Duttman 10:18:25 02/14/16 (0)