Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: Different function of 12au7s and 2 12ax7s in amplifier. posted by TGT on February 2, 2016 at 14:20:22:
Hi
It is impossible to say without seeing the schematic. As a gross rule of thumb, in many integrated amps changing the preamp tubes will have a little more effect than changing the drivers and the output tubes will have the least effect. But that is a terribly gross generalization and it will depend on the circuit. Also the initial quality of the tubes before you change them. There are many circuits where a 12bh7 can be used in place of a 12au7 as well, but without seeing a schematic it is impossible to know.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Different function of 12au7s and 2 12ax7s in amplifier. - dls123 22:45:42 02/02/16 (2)
- RE: Different function of 12au7s and 2 12ax7s in amplifier. - mcgjohn@yahoo.com 09:25:56 02/03/16 (1)
- RE: Different function of 12au7s and 2 12ax7s in amplifier. - Jim McShane 09:16:10 02/05/16 (0)