Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: Tube rolling buzz with new 12AX7's posted by TubeAcolyte on April 26, 2015 at 09:53:11:
Again the buzz, not hum, is steady and both channels.
The tubes are good. they were tested before I got them.
Age and type - New TungSols with gold pins.
Right now I am using the RCA Blackplate in V1 and the Tungsols in V2 and V3 with no problems. However I did have to "wiggle" the RCA last night to get better contact.
I can retry the Tungsol in V1 and try "the wiggle" with the amp on. WOWWWWW do I hate doing that! But I tried all the Tungsols in that position several times and the buzz was the same. So a contact problem would change with all that motion????
charles
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Tube rolling buzz with new 12AX7's - airtime 06:09:05 04/27/15 (9)
- socket contact - FenderLover 07:01:05 04/27/15 (8)
- RE: socket contact - airtime 06:19:12 04/28/15 (5)
- RE: socket contact - FenderLover 07:09:03 04/28/15 (4)
- Did the socket trick - no luck - airtime 16:07:04 04/28/15 (2)
- Odd... - FenderLover 06:33:47 04/29/15 (1)
- RE: Odd... - airtime 16:14:43 04/29/15 (0)
- RE: socket contact - airtime 07:44:47 04/28/15 (0)
- RE: socket contact - Jim McShane 19:31:34 04/27/15 (1)
- RE: socket contact - airtime 06:13:07 04/28/15 (0)