Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: Just put a GE 5751 in my amp... posted by BCR on March 11, 2015 at 17:13:55:
Is the 12at7 usable at 1.28ma plate current with a 47k plate load resistor and 160vdc on the plate?
The cathode resistor would have to be changed and that would mess up the feedback so the 100 ohm below the cathode resistor would likely have to be recalculated.
The cathode bypass cap might need to be changed as well.
BTW My comments are based on the Leak Stereo 20 amplifier schematic that the design of the Stereo 20pp is inspired by and I'm looking at the input stage.
http://www.iconaudio.com/portfolio-item/stereo-20-pp/
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Just put a GE 5751 in my amp... - Tre' 18:50:29 03/11/15 (3)
- RE: Just put a GE 5751 in my amp... - BCR 04:04:56 03/12/15 (2)
- RE: Just put a GE 5751 in my amp... - Tre' 19:45:45 03/12/15 (1)
- RE: Just put a GE 5751 in my amp... - BCR 03:08:11 03/13/15 (0)