Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
Hi
The right channel of my Copland CTA 401 is not working. First I have the schematic, very easy to find in the web, http://www.audioamp.republika.pl/schematy/cta401.gif , but there is no value for the components and it's difficult to identify some little caps. Also on my board I dont have R48. Secondo when I made some comparative test between left and right channel I have very different result. When I test voltage on R8 on left chanel the result is ok around 260 volts at the bigining and 130 volts at the end. On the right channel I have 260 volt at the bigining and 255 volts at the end. No real drop. R8 is OK I have change it. C5 is also ok. and tubes are ok.
Any suggestion for this problem
Thanks
PAscal
This post is made possible by the generous support of people like you and our sponsors:
Topic - Problem with Copland CTA 401 phono stage - pascal 21:57:54 01/18/15 (4)
- RE: Problem with Copland CTA 401 phono stage - Blackdog 12:48:55 01/19/15 (2)
- RE: Problem with Copland CTA 401 phono stage - pascal 17:21:23 01/19/15 (1)
- RE: Problem with Copland CTA 401 phono stage - Blackdog 17:43:18 01/19/15 (0)
- RE: Problem with Copland CTA 401 phono stage - Caucasian Blackplate 11:56:04 01/19/15 (0)