Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Reflashing Tubes? posted by Lee of Omaha on November 2, 2014 at 12:01:11:
Eli's.correct. The getter flash material once initially flashed cannot be reflashed.
However i have had great success with baking out gassy tubes to activate the getter flash without voltage being applied.
I believe getters get heated in operation, and are supposed to absorb stray gases, the voltage maybe ionizing them. Heating externally will activate getter flash and do a better job in my experience.
I use a toaster oven set at minimum and raise temp 50 degrees F every 30 minutes to 300 degrees and hold for several hours. When done I unplug toaster and allow to drop to room.temperature.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Reflashing Tubes? - unclestu 13:45:26 11/02/14 (3)
- RE: Reflashing Tubes? - Sherwood Forest 07:22:22 11/04/14 (1)
- RE: Reflashing Tubes? - Lee of Omaha 08:41:13 11/05/14 (0)
- RE: Reflashing Tubes? - Todd Slaughter 15:40:43 11/02/14 (0)