|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: RE: Phono hum in Scott 222c posted by Triode_Kingdom on August 30, 2014 at 16:43:58:
ha, I double checked to make sure it doesn't follow that part of the schematic :)
yes all the tube shields are present, and all of the filters and DC caps have been replaced including 201 and 202, now a 50/50 F&T..cap. I experimented changing the ground of that cap to different locations but no change..
It is hard to tell with hum if it is 120 or 60, I could be wrong..
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Phono hum in Scott 222c - mr9iron 16:57:53 08/30/14 (3)
- RE: Phono hum in Scott 222c - Triode_Kingdom 17:30:02 08/30/14 (2)
- RE: Phono hum in Scott 222c - mr9iron 18:26:07 08/30/14 (1)
- RE: Phono hum in Scott 222c - Triode_Kingdom 21:28:11 08/30/14 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
