Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: gassy tubes posted by tesla on March 31, 2014 at 06:41:26:
I have no experience with raised heater voltage but you could try baking in an oven , I have had limited success with this . Alternatively you could try running the tube heaters only on the tester overnight . Sometimes I have found power tubes to test as less gassy on lower G2 voltages , then retested after a few hours soak test at normal G2 voltage . YMMV and all that etc etcAl
Edits: 03/31/14
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: gassy tubes - Al Noakes 06:49:30 03/31/14 (0)