Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Classic ground loop posted by Chris O on September 15, 2012 at 11:14:37:
Chris,
thanks for the info, the stock set up had each ground of the RCA meeting simultaneously at a solder tab on the chassis. I am guessing this is the intended "signal ground" Both you and Tre suggest tying the RCA ground together first and then go to the signal ground. I thought this is what occurred on the old set up, but I guess it's slightly different. I'll give it a shot.
thanks so much for your reply, I'll keep digging, appreciated..
Jeff,
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Classic ground loop - mr9iron 20:25:51 09/15/12 (0)