Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Test points posted by 1973shovel on July 24, 2012 at 17:29:17:
Yes probably test point jacks is a better name. There is a 1ohm resistor in the cathode leg of the 6C33C. These test points are wired across the 1ohm resistor. By adjust a 25 turn trim pot the voltage (which is about 0.2V or 200mV) across this resistor varies as the 6C33C passes more or less current due to changes in bias.
The current changes are reflected directly across the cathode resistor (as voltage changes) and can be read off a inexpensive meter from the test jacks.
| retro-thermionic |
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Test points - mwhouston 06:33:17 07/25/12 (1)
- I simply called them what Mouser and DigiKey list them under - 1973shovel 13:19:18 07/26/12 (0)