Weird World of Tubes : EF40 - for all you EF86 junkies - kstagger

Tubes Asylum

Questions about tubes and gear that glows. FAQ

Weird World of Tubes : EF40 - for all you EF86 junkies

Some helpful hints on an oddball tube... more to come!
For anyone using the EF86 pentode, NOS tube prices have been rising! What to do? There are new production tubes out there - the discontinued Svetlana EF86 which has a hard brittle top end. The EH EF86 is pretty good, though it seems to lack some music 'color', reminding me of solid-state. I have to hear the latest JJ version - prices are still high on this model.
Back in 1948, Philips introduced the rimlock EF40 tube which was the precursor to the EF86. This tube was used in several pieces of Siemens theater gear and in Philips radios. What makes the EF40 different than the EF86? In this case it is just the base - the EF40 (along with several other excellent tubes - notably the ECC40) uses a B8A socket. The B8A or rimlock socket uses a nub on the side of the tube which centers the tube in the socket. Kind of neat bit of engineering and also forces good contact with the pins. The B8A rimlock socket was eventually discontinued as the majority of small tubes went to U.S. standards. Therefore B8A tube sockets are available mostly through European dealers and can also be found on Ebay. Avoid the Chinese sockets as they do not have the metal outside base to center the tubes.
*I shall make a small note that the inter-electrode capacitances are slightly different between the EF86 and EF40, but not enough to make a difference at the audio level.
Who manufactured the EF40? Sorry - no Telefunken here - just Philips (branded Mullard, Valvo, etc) from Holland and (seems to be mostly) France. Earlier versions were made in the Netherlands while perhaps production was quickly be moved to France. Later 60s production was made by Tungsram. There are also Siemens versions out there but I have yet to hear a pair and I've suspected they are actually Philips since they have the same look. I do have a single Siemens supposedly made in Germany - I would like some further confirmation on this.
Best sounding are the Holland versions followed by the Tungsram. In general the French versions seems to lack the last bit of finesse of the Holland ones - and I've found this true even for EF86s - but the French versions are still very good. Tungsrams have good slam and have excellent dynamics. All versions seem to be very low in microphonics - perhaps it is the rimlock socket holding the tube tightly.
Going prices of the EF40 make them bargains! I've paid anywhere between $2 to $8 each. Provided the socket to be replaced is hardwired, it would only take a little work to convert to use the EF40. Not many of these show up in the U.S, but Canadian and European sellers have them and would be happy if you took them off their hands.

EF40 specs (Open in New Window)

Edits: 12/24/07 12/24/07 12/24/07 12/25/07

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Topic - Weird World of Tubes : EF40 - for all you EF86 junkies - kstagger 19:19:20 12/24/07 (1)

RE: Weird World of Tubes : EF40 - for all you EF86 junkies - Ray Moth 15:59:36 12/27/07 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.