Can I use a Y-Adapter on the RCA outs of my BAT? adding a 3rd output

Tubes Asylum

Questions about tubes and gear that glows. FAQ

I know it is a strange question. Here's why I'm asking:
BAT VK3i XLR outputs are connected to Rogue M150 mono amps. The rogues are running the mid/treble sections of Maggie IIIAs.
BAT RCA outputs are connected to a Crown K2 (800 watts stereo into 4 ohms, no fan). The Crown is running the bass panels of the maggies.
IF it is safe to split the RCA signals with a Y-adapter, I would re-connect my Legacy Audio Thumper subwoofer for 40 hz and below.
If this is not safe, does anyone have any solutions to adding a third pre-output besides adding an active crossover?
Thank you for your help.
Mike

This post is made possible by the generous support of people like you and our sponsors:

The Cable Cooker

Topic - Can I use a Y-Adapter on the RCA outs of my BAT? adding a 3rd output - Mike D 10:10:25 03/26/06 (1)

Shouldn't be a problem. - Dan_ed 16:50:17 03/26/06 (0)

You can not post to an archived thread.