Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Re: 211 bias settings posted by Response34 on October 6, 2004 at 14:37:55:
Bill,Ok, I found the old EL34B's that came with the units, put everything back to stock, and it still would not bias properly. The manual says that you do not have to rebias when changing the EL34's or 12AT7's. I tried three different quads of 12AT7s', and thee different quads of EL34's, and none of them changed the bias setting at all. Only one of the four 211 tubes would go as low as 250mv. I have some new 211's that I bought, so I'll try them next.
Jeff
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 211 bias settings - Sturmey 09:23:43 10/07/04 (2)
- Re: 211 bias settings - Response34 10:18:23 10/07/04 (1)
- Re: 211 bias settings - Sturmey 12:27:20 10/07/04 (0)