|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: BIG CHANGE with the change to ASC 100uF caps in the PS posted by John PA on September 16, 2004 at 09:38:15:
They really are kinda amazing aren't they? One of those things you have to hear to buy into. Glad your ears heard changes in accordance with mine. I bet if you could find away to get them closer than that 18" of wire performance and especially ripple voltage would go down by at least one decimal point. I use a combo of 40uF, small choke, 40uF, resistor, 60uF and ended up with with only a few millivolts of ripple....as in 0.005 VAC.One idea you might consider, or at least what my friend did, was bought an extra chassis from the manufactuer(which was cheaper than we thought) and attached it to the bottom of the old chassis and ended up with a stock looking amp that had a chassis twice as deep and that gave us the room to mount things inside. Just an idea. Glad you like the change.
Now me....I'd like to try those silver supreme coupling caps but wish I could see the physical size as I need them to work with a PCB so lead spacing is an issuse. Didn't you also try out some of the high priced PIO types too?
Russ
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Told ya they had snap - Russ57 12:39:00 09/16/04 (1)
- I have tried Jensen copper pio bypassed with teflon. . . - John PA 12:53:14 09/16/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
