Tubes Asylum

Questions about tubes and gear that glows.

Another glowing red plate in a 7189 - smitlar 19:15:34 05/15/07 (7)
- Re: Another glowing red plate in a 7189 - shermanr@prw.net 06:49:38 05/20/07 (0)
- Re: Another glowing red plate in a 7189 - Eli Duttman 19:38:07 05/15/07 (5)
  - Bias Type - smitlar 12:08:58 05/16/07 (4)
    - Re: Bias Type - Jim McShane 12:41:29 05/16/07 (3)
      - Re: Bias Type - smitlar 21:38:43 05/16/07 (2)
        
        Re: Bias Type - Jim McShane 06:00:06 05/18/07 (1)
        
        Re: Bias Type - smitlar 20:51:39 05/19/07 (0)
Is this tube tester worth 50$ and an hour drive? - Scott Woebcke 11:47:18 05/15/07 (5)
- Re: Is this tube tester worth 50$ and an hour drive? - Ron Oehlert 12:25:30 05/15/07 (4)
  - Re: Is this tube tester worth 50$ and an hour drive? - Jim McShane 16:08:07 05/15/07 (3)
    - A good quality "tube checker" with a sensitive shorts test is handy - anumber1 18:35:25 05/15/07 (2)
      - A basic multi-meter can check for shorts. - Ron Oehlert 07:13:48 05/16/07 (1)
        
        Some tubes show shorts only when heated..... - Alpha Al 07:22:22 05/16/07 (0)
'orphan' metal based Sylvania 6SN7 - j.click 19:38:50 05/14/07 (3)
- I can help you out - Ed Sawyer 19:15:48 05/15/07 (0)
- Contact Len - Frihed89 22:41:16 05/14/07 (0)
- Re: 'orphan' metal based Sylvania 6SN7 - some young guy 20:36:50 05/14/07 (0)
Setting for 6GW8/ECL86 in Hickok TV3 tube tester - ecl86 17:04:40 05/14/07 (0)
6113 tube - cjfrbw 16:55:09 05/14/07 (7)
- Re: 6113 tube - Jim McShane 17:33:52 05/14/07 (0)
- Re: 6113 tube - elektron 17:33:37 05/14/07 (0)
- I think they must be 12ax7a.... - cjfrbw 17:05:10 05/14/07 (4)
  - Re: I think they must be 12ax7a.... - Jim McShane 20:28:00 05/14/07 (3)
    - Thank you, I got it. nt - cjfrbw 22:08:19 05/14/07 (2)
      - Re: Thank you, I got it. nt - Jim McShane 06:32:35 05/15/07 (1)
        
        Sawrite, I answered my own post, thanks for the info. nt - cjfrbw 09:45:35 05/15/07 (0)
What specs when looking for a "good enough" substitute? - Mark Tinordi 15:35:37 05/14/07 (2)
- Re: What specs when looking for a "good enough" substitute? - JimL 22:46:35 05/15/07 (0)
- Re: What specs when looking for a "good enough" substitute? - elektron 17:51:39 05/14/07 (0)
JJ KT77s crooked in base? - David Anderson 10:56:17 05/14/07 (11)
- Re: JJ KT77 quality - jowillia 23:20:56 05/19/07 (0)
- Bummer about their QC. I was fortunate: my quad are perfect physically and sonically. They are gems...N/T - musetap 21:30:17 05/15/07 (0)
- I don't trust JJ for anything....except one - Kevin Deal 09:44:46 05/15/07 (3)
  - I've got a woody for JJs - nightdoggy 22:07:59 05/19/07 (0)
  - Re: I don't trust JJ for anything....except one - scriabin 22:19:29 05/17/07 (0)
  - Re: I don't trust JJ for anything....except one - mmhifi 13:17:57 05/15/07 (0)
- Ugly, but sound good (when they work) - CometCKO 18:28:22 05/14/07 (1)
  - Re: Ugly, but sound good (when they work) C - Michael Samra 12:49:49 05/15/07 (0)
- Re: JJ KT77s crooked in base? - Jim McShane 13:29:03 05/14/07 (2)
  - You're why I haven't tried these things, Thanks a lot! nt - risabet 21:13:56 05/14/07 (0)
  - All this time I thought I had JJ KT77s from Rogue - nightdoggy 19:56:54 05/14/07 (0)
What to do with a day in Hong Kong - gortnipper 02:20:12 05/14/07 (0)
Your most critical tube roll - Mechans 00:44:27 05/14/07 (4)
- Replacing Philips ECG 12AT7 in a microphone preamp - Bambi B 08:50:09 05/15/07 (0)
- Re: Your most critical tube roll - Alnicoman 05:29:13 05/15/07 (0)
- Its a signal tube - Michael Samra 03:16:17 05/14/07 (1)
  - Re: Its a signal tube wrong thread see above - Mechans 07:03:27 05/14/07 (0)
Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - Kiefer74.1 16:54:27 05/13/07 (12)
- Problem solved? - Kiefer74.1 21:48:46 05/14/07 (0)
- Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - pawlowski6132 19:39:09 05/13/07 (1)
  - Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - Kiefer74.1 21:53:20 05/14/07 (0)
- Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - elektron 17:28:29 05/13/07 (1)
  - Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - Kiefer74.1 17:44:05 05/13/07 (0)
- maybe it's a newbie thing, but... - Kiefer74.1 17:24:28 05/13/07 (0)
- Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - HoosierAudio 17:24:09 05/13/07 (1)
  - Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - Kiefer74.1 17:36:34 05/13/07 (0)
- Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - Mr. Droopy-Drawers 17:20:55 05/13/07 (3)
  - Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - Kiefer74.1 17:45:04 05/13/07 (2)
    - Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - Mechans 23:56:30 05/13/07 (1)
      - Re: Major problem or simple fix?...I'm freakin!!!!!! please read if you have tube knowledge... - Kiefer74.1 21:35:34 05/14/07 (0)
Got lucky again... long. - ABliss 16:26:14 05/13/07 (5)
- Outstanding!! - mpathus 14:21:17 05/14/07 (0)
- Congratulations - unclestu52 00:47:34 05/14/07 (2)
  - fair? - Ed Sawyer 19:27:33 05/14/07 (1)
    - R Well I guess... - unclestu52 01:14:45 05/15/07 (0)
- very nice!!!! - REL54 17:41:33 05/13/07 (0)
VRD (NOS Valves) amps, anyone heard them? - Ozzy 14:47:07 05/13/07 (33)
- Re: VRD (NOS Valves) amps, anyone heard them? - Iain42 11:01:00 05/16/07 (0)
- sure... - Sector-7G 17:57:18 05/14/07 (25)
  - Re: sure... - NOS440 09:50:18 05/16/07 (24)
    - Re: sure... - Sector-7G 17:34:48 05/16/07 (23)
      - Re: sure... - NOS440 06:51:19 05/17/07 (22)
        
        Re: sure... - NOS440 08:35:51 05/18/07 (10)
        
        Re: sure... - Sector-7G 16:15:48 05/20/07 (0)
        
        Re: sure... - Stephæn 15:59:38 05/20/07 (0)
        
        Re: sure... - Jim McShane 13:11:35 05/20/07 (7)
        
        Re: sure... - NOS440 19:06:59 05/21/07 (6)
        
        Re: sure... - Jim McShane 15:35:30 05/22/07 (2)
        
        Re: sure... - NOS440 06:37:04 05/23/07 (1)
        
        Re: sure... - Sector-7G 12:35:55 05/23/07 (0)
        
        Re: sure... - NOS Valves 19:11:32 05/21/07 (2)
        
        Sorry ... - The Bored 11:36:06 05/22/07 (1)
        
        RE: Sorry ... - NOS440 13:34:34 05/22/07 (0)
        
        and you need to change that 'A' in your registration - Sector-7G 03:01:34 05/18/07 (0)
        
        anytime! - Sector-7G 16:13:06 05/17/07 (9)
        
        Why call them Mk 3's? - Newbie 09:39:46 05/18/07 (8)
        
        easy! - Sector-7G 16:25:24 05/20/07 (7)
        
        RE: easy! - NOS Valves 19:25:29 05/21/07 (6)
        
        RE: easy! - Sector-7G 09:14:23 05/22/07 (5)
        
        RE: easy! - NOS440 13:38:50 05/22/07 (4)
        
        RE: easy! - Sector-7G 14:14:14 05/22/07 (3)
        
        RE: easy! - Ozzy 16:32:17 05/22/07 (1)
        
        enjoy them then! - Sector-7G 12:41:56 05/23/07 (0)
        
        RE: easy! - NOS440 15:16:02 05/22/07 (0)
- Re: VRD (NOS Valves) amps, anyone heard them? - terrapin 12:17:16 05/14/07 (1)
  - Re: VRD (NOS Valves) amps, anyone heard them? - Ozzy 08:45:28 05/16/07 (0)
- Re: VRD (NOS Valves) amps, anyone heard them? - jcmusic 18:12:56 05/13/07 (3)
  - Re: VRD (NOS Valves) amps, anyone heard them? - Ozzy 09:03:57 05/14/07 (2)
    - Re: VRD (NOS Valves) amps, anyone heard them? - 711smilin 17:54:27 05/26/07 (1)
      - Re: VRD (NOS Valves) amps, anyone heard them? - NOS440 07:51:40 06/22/07 (0)
Variants - jcmusic 12:38:46 05/13/07 (1)
- Re: Variants - Mark Tinordi 16:38:38 05/13/07 (0)
Mixed Pair??? - pawlowski6132 11:37:07 05/13/07 (3)
- Re: Mixed Pair??? - wpod 18:48:34 05/13/07 (2)
  - Re: Mixed Pair??? - pawlowski6132 19:18:36 05/13/07 (1)
    - Re: Mixed Pair??? - wpod 07:04:55 05/14/07 (0)
Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - tom92602 10:32:20 05/13/07 (11)
- Isn't it a little late to be asking for help? - nightdoggy 19:57:47 05/16/07 (2)
  - Re: Isn't it a little late to be asking for help? - tom92602 20:53:04 05/16/07 (1)
    - Another example of why I'm reluctant to buy used gear - nightdoggy 15:16:04 05/17/07 (0)
- Re: Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - tom92602 11:51:57 05/14/07 (2)
  - Re: Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - Sondek 14:36:24 05/14/07 (1)
    - Re: Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - Sondek 15:26:00 05/14/07 (0)
- Re: Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - tom92602 11:49:59 05/14/07 (0)
- Re: Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - truep 12:21:41 05/13/07 (1)
  - Re: Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - tom92602 13:22:41 05/13/07 (0)
- Re: Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - Sondek 11:10:43 05/13/07 (1)
  - Re: Using ECC83 in place of 6DJ8, Will I blow up my preamp?? - tom92602 11:40:52 05/13/07 (0)
12AX7/ECC83 in my EAR 861 - Rojoh 08:00:52 05/13/07 (2)
- Re: 12AX7/ECC83 in my EAR 861 - Gofast 12:17:47 05/13/07 (1)
  - Re: 12AX7/ECC83 in my EAR 861 - Rojoh 10:24:24 05/14/07 (0)
Tubes Tubes Tubes - jcmusic 07:37:21 05/13/07 (2)
- Re: Tubes Tubes Tubes - bluelobster 10:07:23 05/13/07 (1)
  - Re: Tubes Tubes Tubes - jcmusic 12:36:53 05/13/07 (0)
Ford Motor Co. tubes? - PureAudio 06:07:54 05/13/07 (5)
- Interesting. Thanks for the responses. * - PureAudio 18:57:36 05/13/07 (0)
- Re: Ford Motor Co. tubes? - Alpha Al 17:55:45 05/13/07 (0)
- Re: Ford Motor Co. tubes? - Jeff A W 06:31:50 05/13/07 (2)
  - Re: Ford Motor Co. tubes? - Jim McShane 11:11:28 05/13/07 (1)
    - Re: Ford Motor Co. tubes? - Len_ 12:59:54 05/13/07 (0)
Any replacement for Sovtek 5U4G rectifier tubes (new tubes) - acours 01:46:02 05/13/07 (7)
- replacements for 5u4s - Michael Samra 04:27:37 05/13/07 (4)
  - Re: replacements for 5u4s - Eli Duttman 07:25:00 05/13/07 (1)
    - Re: replacements for 5u4s - Michael Samra 08:18:52 05/13/07 (0)
  - Woops..Here are the tubes I mean. - Michael Samra 04:29:01 05/13/07 (1)
    - Re: Woops..Here are the tubes I mean. - wpod 14:43:07 05/14/07 (0)
- Re: Any replacement for Sovtek 5U4G rectifier tubes (new tubes) - Eli Duttman 03:03:47 05/13/07 (1)
  - Re: Any replacement for Sovtek 5U4G rectifier tubes (new tubes) - zacster 08:58:13 05/13/07 (0)
News report on Sovtek on Russia Today, Russia's international news channel - FrankC 23:35:07 05/12/07 (0)
Anyone else tried the Elite-80 6AV5 amplifier? - lektrik 22:41:03 05/12/07 (0)
Tube screw-up question - Mark Tinordi 21:58:23 05/12/07 (4)
- Re: Tube screw-up question - Ron Oehlert 22:26:51 05/12/07 (3)
  - Thanks a lot - Mark Tinordi 22:43:23 05/12/07 (2)
    - Re: Thanks a lot - Mark Tinordi 22:59:50 05/12/07 (1)
      - Re: Thanks a lot - zacster 09:04:59 05/13/07 (0)
what's the advantage of twin-ing rectifiers (dual rect.)??.....nt - Fatcobra 17:24:38 05/12/07 (3)
- Re: what's the advantage of twin-ing rectifiers (dual rect.)??.....nt - danlaudionut 17:54:44 05/12/07 (2)
  - thanks... - Fatcobra 20:23:23 05/15/07 (1)
    - Re: thanks... - danlaudionut 20:34:38 05/15/07 (0)
CAT SL1 Ultimate: What tubes and How many of those? - briandwlee 21:15:10 05/11/07 (19)
- Re: CAT SL1 Ultimate: What tubes and How many of those? - ironbut 17:32:33 05/16/07 (0)
- CAT SL1 Ultimate: 6 X 6922, 4 X 12AX7- but apparently you have to ask for nice ones ! - Bambi B 07:27:55 05/12/07 (17)
  - 12AX7: Telefunken Replica? - briandwlee 14:31:33 05/12/07 (7)
    - Re: 12AX7: Telefunken Replica? - Eli Duttman 16:07:45 05/12/07 (6)
      - And isn't the JJ "ECC803S" supposed to have some connetion to the non-frame grid Telefunken of that name? - Bambi B 16:58:00 05/12/07 (5)
        
        Re: And isn't the JJ "ECC803S" supposed to have some connetion to the non-frame grid Telefunken of that name? - Eli Duttman 03:31:02 05/13/07 (0)
        
        Re: And isn't the JJ "ECC803S" supposed to have some connetion to the non-frame grid Telefunken of that name? - Jim McShane 17:22:14 05/12/07 (3)
        
        I like the TS 6550 reissue a lot - nightdoggy 20:06:01 05/14/07 (2)
        
        Re: I like the TS 6550 reissue a lot - Jim McShane 11:53:07 05/16/07 (1)
        
        I'll order them from you when I do - nightdoggy 20:04:26 05/16/07 (0)
  - Re: CAT SL1 Ultimate: 6 X 6922, 4 X 12AX7- but apparently you have to ask for nice ones ! - Jim McShane 09:55:43 05/12/07 (8)
    - Thanks, Bambi B. and Jim - briandwlee 14:28:59 05/12/07 (0)
    - EH6922 in CAT SL-1 - Bambi B 10:50:37 05/12/07 (6)
      - Re: EH6922 in CAT SL-1 - Jim McShane 17:12:47 05/12/07 (5)
        
        Re: EH6922 in CAT SL-1 - posbwp55@msn.com 23:08:49 05/12/07 (3)
        
        Re: EH6922 in CAT SL-1 - nightdoggy 07:04:24 05/15/07 (0)
        
        Re: EH6922 in CAT SL-1 - rlawry 08:06:00 05/14/07 (0)
        
        Re: EH6922 in CAT SL-1 - Jim McShane 11:05:41 05/13/07 (0)
        
        Re: EH6922 in CAT SL-1 - briandwlee 20:38:11 05/12/07 (0)
the need for matched pairs... - jarthel 10:04:32 05/11/07 (7)
- Re: the need for matched pairs... - danlaudionut 15:06:01 05/11/07 (6)
  - How about pairs vs. quad? - smitlar 15:26:28 05/11/07 (5)
    - Re: How about pairs vs. quad? - danlaudionut 15:42:18 05/11/07 (4)
      - Re: How about pairs vs. quad? - Jim McShane 16:32:57 05/11/07 (3)
        
        Bias/Balance Pot - smitlar 18:06:30 05/11/07 (1)
        
        Re: Bias/Balance Pot - danlaudionut 20:34:03 05/11/07 (0)
        
        I stand corrected ... - danlaudionut 16:36:37 05/11/07 (0)
has anyone used a 6GU7 in place of 6CG7? - jarthel 09:55:21 05/11/07 (2)
- Re: has anyone used a 6GU7 in place of 6CG7? - tvr2500m 12:00:18 05/18/07 (0)
- Re: has anyone used a 6GU7 in place of 6CG7? - Frihed89 01:44:29 05/13/07 (0)
Driver tube Question? - jboma@aol.com 13:44:30 05/10/07 (1)
- Re: Driver tube Question? - Rob Mercure 05:18:38 05/12/07 (0)
Tube rolling ARC LS5/III - Gofast 07:06:57 05/10/07 (3)
- Oops, ignore the top message. Read this instead - Gofast 07:12:23 05/10/07 (2)
  - Re: Oops, ignore the top message. Read this instead - MJL 12:21:43 05/10/07 (1)
    - Re: Oops, ignore the top message. Read this instead - Gofast 13:50:53 05/10/07 (0)
Siemens 6SN7WGTA - Lowrider 00:38:15 05/10/07 (6)
- They sound 'livelier' than EHs? I think they'd be unlistenable for me. I still love the slight warmth... - jeffreybehr 10:14:31 05/10/07 (1)
  - Re: They sound 'livelier' than EHs? I think they'd be unlistenable for me. I still love the slight warmth... - Lowrider 08:42:01 05/11/07 (0)
- Re: Siemens 6SN7WGTA - Len_ 09:38:02 05/10/07 (3)
  - Re: Siemens 6SN7WGTA - Lowrider 09:05:58 05/11/07 (1)
    - Re: Siemens 6SN7WGTA - benie 04:42:10 05/12/07 (0)
  - Re: Siemens 6SN7WGTA - Jim McShane 06:23:36 05/11/07 (0)
www.vacuumtubesinc.com: reliable? - jarthel 20:24:28 05/09/07 (8)
- Add my name ..... - tville3 07:39:22 05/11/07 (0)
- Re: www.vacuumtubesinc.com: reliable? - maynardg 14:16:16 05/10/07 (0)
- Absolutely fine - good prices - andy evans 06:14:52 05/10/07 (0)
- yes! - kstagger 05:25:16 05/10/07 (0)
- Re: www.vacuumtubesinc.com: reliable? - Len_ 22:07:04 05/09/07 (0)
- Re: www.vacuumtubesinc.com: reliable? - akanalog@yahoo.com 21:55:49 05/09/07 (2)
  - Re: www.vacuumtubesinc.com: reliable? - sacd lover 04:02:40 05/10/07 (1)
    - Re: www.vacuumtubesinc.com: reliable? - IdlerWheel 12:43:33 05/10/07 (0)
Raytheon 5814 getter type ? - bernard991 14:12:41 05/09/07 (8)
- Re: Raytheon 5814 getter type ? - mdjukic99@yahoo.com 07:48:33 05/11/07 (0)
- Re: Raytheon 5814 getter type ? - tvr2500m 08:49:32 05/10/07 (3)
  - Re: Raytheon 5814 getter type ? - bernard991 14:19:30 05/10/07 (2)
    - Re: Raytheon 5814 getter type ? - tvr2500m 12:36:11 05/18/07 (0)
    - Re: Raytheon 5814 getter type ? - dls123 07:13:29 05/11/07 (0)
- Re: Raytheon 5814 getter type ? - dls123 14:41:48 05/09/07 (2)
  - Re: Raytheon 5814 getter type ? - bernard991 16:29:11 05/09/07 (1)
    - Re: Raytheon 5814 getter type ? - dls123 07:01:01 05/10/07 (0)
6SN7 tubes identification - tubers 13:53:52 05/09/07 (4)
- Re: 6SN7 tubes identification - Len_ 22:06:39 05/09/07 (3)
  - Re: 6SN7 tubes identification - tubers 12:57:56 05/10/07 (2)
    - Re: 6SN7 tubes identification - tango4@telia.com 14:14:07 05/10/07 (1)
      - Re: 6SN7 tubes identification - tubers 07:56:04 05/11/07 (0)
Have I damaged my amp? - irbow 10:37:42 05/09/07 (3)
- Re: Have I damaged my amp? - Chris O 13:43:32 05/09/07 (2)
  - Re: Have I damaged my amp? - irbow 14:33:13 05/09/07 (1)
    - Re: Have I damaged my amp? - Chris O 19:20:43 05/09/07 (0)
pete millett's pp w/universal pcb - rcb 10:26:28 05/09/07 (0)
JJ KT77 new larger pins still on the small side? - yo2tup 09:28:22 05/09/07 (5)
- Re: JJ KT77 new larger pins still on the small side? - Jim McShane 12:55:34 05/09/07 (4)
  - Re: JJ KT77 new larger pins still on the small side? - yo2tup 17:23:44 05/09/07 (3)
    - Re: JJ KT77 new larger pins still on the small side? - danlaudionut 15:13:42 05/11/07 (0)
    - Re: JJ KT77 new larger pins still on the small side? - Jim McShane 12:05:33 05/11/07 (1)
      - How To Order The Proper Bias Point - IdlerWheel 06:36:49 05/14/07 (0)
tube damper wire broke - oocela 06:07:30 05/09/07 (0)
what happens when a VR tube like 0D3 fails? - jarthel 21:02:05 05/08/07 (5)
- It depends.... - Jim Doyle 15:04:51 05/09/07 (0)
- I've had two fail... - lipmanl 06:18:57 05/09/07 (2)
  - Re: I've had two fail... - Rob Mercure 12:33:02 05/09/07 (1)
    - Had no idea--thanks! (nt) - lipmanl 18:23:25 05/09/07 (0)
- Re: what happens when a VR tube like 0D3 fails? - benie 02:32:22 05/09/07 (0)
Power tube tester that can check for noise? - posbwp55@msn.com 16:51:45 05/08/07 (1)
- Re: Power tube tester that can check for noise? - Sherlock 17:45:50 05/08/07 (0)
Raytheon 12ax7 long grayplate square getter - posbwp55@msn.com 14:54:07 05/08/07 (2)
- Re: Raytheon 12ax7 long grayplate square getter - Fatcobra 17:32:35 05/12/07 (1)
  - Re: Raytheon 12ax7 long grayplate square getter - posbwp55@msn.com 20:00:20 01/20/08 (0)
Dyna Mark3 Twistlock Electrolytics - Mark Korda 10:57:54 05/08/07 (5)
- Re: Dyna Mark3 Twistlock Electrolytics - Michael Samra 09:46:46 05/09/07 (1)
  - Re: Hear Hear - groove 20:20:35 05/09/07 (0)
- The SDS boards are good - kstagger 07:54:38 05/09/07 (0)
- Two words: Joe Curcio - groove 17:35:42 05/08/07 (0)
- Dynakitparts will be coming out with one soon ... - Bob Latino 15:32:21 05/08/07 (0)
Cary V12R Tube Question - tnewell 08:57:21 05/08/07 (3)
- Re: Cary V12R Tube Question - claud 05:23:18 05/09/07 (0)
- Re: Cary V12R Tube Question - Mechans 15:59:25 05/08/07 (1)
  - Re: Cary V12R Tube Question - tnewell 17:35:57 05/08/07 (0)
sovtel 12ax7lps vs tung sol reissue - oldmac 06:54:50 05/08/07 (4)
- Re: sovtel 12ax7lps vs tung sol reissue - JoKath 12:39:26 05/08/07 (3)
  - Re: sovtel 12ax7lps vs tung sol reissue - Stale 15:05:33 05/08/07 (1)
    - Re: sovtel 12ax7lps vs tung sol reissue - Jim McShane 15:30:57 05/09/07 (0)
  - Re: sovtel 12ax7lps vs tung sol reissue - Jim McShane 13:27:40 05/08/07 (0)
what's the purpose of the pins 3 and 7 in an 8pin VR tube? - jarthel 23:22:50 05/07/07 (3)
- Re: what's the purpose of the pins 3 and 7 in an 8pin VR tube? - Tom Bavis 05:56:53 05/08/07 (2)
  - I assume you meant something like this... (image inside) - jarthel 17:37:08 05/08/07 (0)
  - Re: what's the purpose of the pins 3 and 7 in an 8pin VR tube? - TimFox 10:49:58 05/08/07 (0)
Leaked Potting in Fisher Model 100 monoblocks? - Phil Jeffery 21:02:58 05/07/07 (5)
- Re: Leaked Potting in Fisher Model 100 monoblocks? - scrooie looie 19:02:57 05/08/07 (1)
  - Re: Leaked Potting in Fisher Model 100 monoblocks? - Phil Jeffery 22:01:31 05/08/07 (0)
- Re: Leaked Potting in Fisher Model 100 monoblocks? - Michael Samra 01:40:46 05/08/07 (1)
  - Re: Leaked Potting in Fisher Model 100 monoblocks? - Phil Jeffery 21:59:11 05/08/07 (0)
- Typo; power transformer that is, not power amp. (nt) - Phil Jeffery 21:07:19 05/07/07 (0)
Repair person - Kindablue 20:38:43 05/07/07 (0)
Best East Coast Swap Meet this Friday/Saturday !!! - Interstage Tranny 18:14:06 05/07/07 (2)
- Re: Best East Coast Swap Meet this Friday/Saturday !!! - sgmlaw 13:01:24 05/08/07 (1)
  - See you there then! nt - bluelobster 16:23:29 05/08/07 (0)
Out, damn buzz! - thoriated_tiger 17:29:11 05/07/07 (8)
- You should come on down and hear Rick's new preamp - Russ57 04:50:58 05/08/07 (2)
  - lemme guess.. - thoriated_tiger 15:15:13 05/08/07 (1)
    - Nope - Russ57 04:32:31 05/09/07 (0)
- Illinois Capacitor to re-cap my Scott??? (Wrong forum...I know. Sorry) - tweakk 18:08:22 05/07/07 (4)
  - Here's part 1 of my SP6 rebuild - Gofast 06:11:36 05/08/07 (1)
    - Thanks. Nice job on the pre-amp. - tweakk 15:50:26 05/08/07 (0)
  - Re: Illinois Capacitor to re-cap my Scott??? (Wrong forum...I know. Sorry) - Ron Oehlert 20:49:48 05/07/07 (1)
    - Thanks again Ron. Plenty of space. What sounds better?...NT - tweakk 21:09:37 05/07/07 (0)
Is this a FAKE Telefunken 12AT7 ? - photo of tube inside - Bob Latino 13:29:00 05/07/07 (4)
- Re: Is this a FAKE Telefunken 12AT7 ? - photo of tube inside - edisonwu 12:01:08 05/09/07 (0)
- Thanks for the information (nt) - Bob Latino 13:59:59 05/07/07 (0)
- Re: Is this a FAKE Telefunken 12AT7 ? - photo of tube inside - tango4@telia.com 13:44:41 05/07/07 (0)
- Siemens, Munich Prod. Tube relabeled by Telefunken (nt) - tubemonger 13:36:55 05/07/07 (0)
want to source telefunken 6463 - 6463 12:32:11 05/07/07 (1)
- Re: want to source telefunken 6463 - coresta 00:18:30 05/08/07 (0)
Thanks Ron Oehlert. - tweakk 10:45:20 05/07/07 (1)
- Years of use - Ron Oehlert 12:16:59 05/07/07 (0)
Anyone near Pittsburgh with a tube tester? - Sigmund 08:47:09 05/07/07 (2)
- Yes. - Plinko 11:12:03 05/07/07 (1)
  - Thanks, Plinko. I'll check him out. - Sigmund 13:47:31 05/07/07 (0)
Ping Michael Samra, re-JJkt77 - rob mac 21:00:01 05/06/07 (1)
- Re: Ping Michael Samra, re-JJkt77 - Michael Samra 03:40:04 05/07/07 (0)
voltage ? - transamz 19:31:24 05/06/07 (0)
looking for 6L6 that sounds like a KT66 - Gofast 19:23:36 05/06/07 (8)
- Anyone tried this tube? TAD 6L6GC-STR - Gofast 07:34:07 05/07/07 (1)
  - Re: Anyone tried this tube? TAD 6L6GC-STR - Greg W 03:23:32 05/08/07 (0)
- Re: looking for 6L6 that sounds like a KT66 - Hendrik 07:23:47 05/07/07 (0)
- Have you considered NOS 7581?(nt) - wpod 06:44:15 05/07/07 (1)
  - Are GE the only 7581 A? - Gofast 11:41:16 05/08/07 (0)
- Here is a perfect suggestion - Michael Samra 03:53:29 05/07/07 (2)
  - Thanks. Have you tried - Gofast 04:40:01 05/07/07 (1)
    - Re: Thanks. Have you tried - Michael Samra 08:22:03 05/07/07 (0)
6F6GT - DP5908 17:12:05 05/06/07 (1)
- Re: 6F6GT - Mike Burrows 20:07:44 05/06/07 (0)
winding a output tranformer - nickh 17:07:38 05/06/07 (4)
- You are setting wrong targets. - sser2 11:59:21 05/07/07 (2)
  - Re: You are setting wrong targets. - nickh 12:12:02 05/07/07 (1)
    - You have other problems here. - sser2 14:59:44 05/07/07 (0)
- Re: winding a output tranformer - Tre' 19:25:55 05/06/07 (0)
The Dixie Dregs Band - Bobbyo 14:15:25 05/06/07 (6)
- Re: The Dixie Dregs Band - mspc 05:46:54 05/13/07 (0)
- Re: The Dixie Dregs Band - Mark Korda 14:53:59 05/08/07 (0)
- Re: The Dixie Dregs Band - Ozzy 02:17:37 05/07/07 (0)
- Re: The Dixie Dregs Band - SoCalAl 18:45:01 05/06/07 (0)
- Yes! - Alpha Al 18:03:46 05/06/07 (1)
  - Re: Yes! - Bobbyo 19:17:30 05/14/07 (0)
Tube amps information - Kindablue 13:54:16 05/06/07 (4)
- Re: Tube amps information - maynardg 03:46:03 05/07/07 (0)
- Try Pete's web site - Russ57 18:04:10 05/06/07 (0)
- did you try "A Taste of Tubes" yet? - mhardy6647 17:00:02 05/06/07 (1)
  - also... - mhardy6647 17:04:44 05/06/07 (0)
miswired 5AR4 - jey 13:51:21 05/06/07 (1)
- Does it really matter? - Alpha Al 17:20:05 05/07/07 (0)
Best dampening for microphonic 6c4's? - DWPC 13:33:30 05/06/07 (4)
- The 6C4/M8080/MC90/6135 is the MOST-microfonic vacuumtube in my 40 years... - jeffreybehr 00:08:15 05/07/07 (1)
  - Re: The 6C4/M8080/MC90/6135 is the MOST-microfonic vacuumtube in my 40 years... - DWPC 10:43:22 05/09/07 (0)
- HAL-Os - Mo' Joe 21:15:12 05/06/07 (0)
- Re: Best dampening for microphonic 6c4's? - Alpha Al 17:52:54 05/06/07 (0)
"Fuller" jewelry cleaner for cleaning pin's...? - JANDG 11:11:25 05/06/07 (0)
Could GE ECL86 tubes be re-branded Telefunkens???...(nt) - tweakk 10:13:11 05/06/07 (4)
- Yes - Ron Oehlert 10:47:47 05/06/07 (3)
  - Thanks. Closer inspection shows GT Britain. Mullards?..NT - tweakk 12:10:27 05/06/07 (2)
    - Re: Thanks. Closer inspection shows GT Britain. Mullards?..NT - Ron Oehlert 08:33:09 05/07/07 (0)
    - Re: Thanks. Closer inspection shows GT Britain. Mullards?..NT - Ron Oehlert 19:57:33 05/06/07 (0)
To ARC preamps owners - Aurelien 03:56:59 05/06/07 (1)
- Re: To ARC preamps owners - Michael Samra 21:33:21 05/06/07 (0)
Trouble biasing JJ KT-77 Help!!! - rob mac 20:16:19 05/05/07 (1)
- Re: Trouble biasing JJ KT-77 Help!!! - Michael Samra 05:43:23 05/06/07 (0)
WOW - lovin' the SED 6550s in my mcintosh MC60s! - centaurus3200 19:47:39 05/05/07 (10)
- Re: WOW - lovin' the SED 6550s in my mcintosh MC60s! - Michael Samra 05:49:07 05/06/07 (4)
  - Re: WOW - lovin' the SED 6550s in my mcintosh MC60s! - Jim McShane 11:45:24 05/06/07 (0)
  - thanks mikey... - centaurus3200 11:34:42 05/06/07 (2)
    - Re: thanks mikey... - Michael Samra 08:26:01 05/07/07 (1)
      - ha ha! (nt) - centaurus3200 09:35:34 05/07/07 (0)
- Re: WOW - lovin' the SED 6550s in my mcintosh MC60s! - nightdoggy 03:38:42 05/06/07 (0)
- Re:I'm waiting - benie 02:44:03 05/06/07 (0)
- Re: WOW - lovin' the SED 6550s in my mcintosh MC60s! - tubers 02:10:25 05/06/07 (2)
  - Re: WOW - lovin' the SED 6550s in my mcintosh MC60s! - tvr2500m 10:45:15 05/06/07 (1)
    - great post, thanks! - centaurus3200 11:41:05 05/06/07 (0)
5814A & ECC82 heater current - Alex 13:49:10 05/05/07 (1)
- Re: 5814A & ECC82 heater current - wpod 17:16:00 05/05/07 (0)
Tung-Sol 6SN7 vs. EH 6SN7's - my preamp's thoughts - bullethead 12:00:07 05/05/07 (4)
- Round-plates? MM-ears? (NT) - jeffreybehr 10:25:38 05/06/07 (1)
  - Re: Round-plates? MM-ears? (NT) - Mechans 05:22:00 05/07/07 (0)
- Re: Tung-Sol 6SN7 vs. EH 6SN7's - my preamp's thoughts - DP5908 21:03:15 05/05/07 (1)
  - yes (nt) - bullethead 16:26:20 05/07/07 (0)
845B reliability? - Kel... 11:18:06 05/05/07 (0)
brimar 13d5 - marvda1 16:50:45 05/04/07 (2)
- Re: brimar 13d5 - mattybumpkin 08:39:38 05/05/07 (0)
- Re: brimar 13d5 - Mechans 18:35:54 05/04/07 (0)
best sounding 5814 - marvda1 13:45:43 05/04/07 (5)
- Re: best sounding 5814 - Aldovan 16:56:21 05/05/07 (0)
- Re: best sounding 5814 - mattybumpkin 08:40:42 05/05/07 (0)
- Re: best sounding 5814 - JANDG 17:32:29 05/04/07 (0)
- Re: best sounding 5814 - R Browne 16:25:59 05/04/07 (1)
  - Re: best sounding 5814 - bernard991 17:47:34 05/08/07 (0)
Glowing plates? - sturob 13:38:08 05/04/07 (3)
- Re: Glowing plates? - unclestu52 22:29:58 05/04/07 (2)
  - Re: Glowing plates? - sturob 23:11:51 05/04/07 (1)
    - Re: Glowing plates? - unclestu52 00:18:07 05/05/07 (0)
Ken Rad date codes.... - jdyer 13:16:46 05/04/07 (1)
- Re: Ken Rad date codes.... - JimL 20:10:57 05/05/07 (0)
How much blue glow is okay in a power tube? - kurt s 09:52:23 05/04/07 (10)
- Thank you. nt - kurt s 15:27:47 05/06/07 (0)
- Do a gas test with a Hickok tester ...NT - Alpha Al 19:50:35 05/04/07 (0)
- Better a blue glow than no glow - zacster 18:35:58 05/04/07 (0)
- Re: How much blue glow is okay in a power tube? - Jim McShane 11:35:50 05/04/07 (5)
  - Question for Jim (long) - unclestu52 12:18:41 05/04/07 (4)
    - Bakeout is a classic treatment to yield high vacuum. - -3db 10:51:12 05/05/07 (1)
      - Thanks...and a question, too - unclestu52 12:48:34 05/05/07 (0)
    - Re: Question for Jim (long) - Jim McShane 19:30:30 05/04/07 (0)
    - Re: Question for Jim (long) - REL54 15:27:54 05/04/07 (0)
- Re: How much blue glow is okay in a power tube? - lipmanl 10:05:41 05/04/07 (0)
National 12ax7 gold - oldmac 05:31:22 05/04/07 (1)
- Re: National 12ax7 gold - kstagger 05:38:14 05/04/07 (0)
Jackson 648 5AR4 settings - drsx 00:47:55 05/04/07 (1)
- Try the same settings as 5U4.... - Alpha Al 18:17:11 05/06/07 (0)
I need ideas how to re-label tubes .... - kellymon 16:39:35 05/03/07 (16)
- Yes you can!! - nsgarch 20:24:59 05/05/07 (3)
  - Re: Yes you can!! - kellymon 09:56:38 05/07/07 (1)
    - Let me know - nsgarch 10:13:01 05/07/07 (0)
  - Sorry (sp) it's NAPHTHA ;--) (nt) - nsgarch 20:28:40 05/05/07 (0)
- The old timers used - j rodney 15:11:15 05/04/07 (0)
- Re: I need ideas how to re-label tubes .... - unclestu52 02:51:46 05/04/07 (1)
  - Thanks, for the suggestion, marking on the bottom at least temporarily is a good idea.(nt) - kellymon 12:55:59 05/04/07 (0)
- Why? Just write the information on a box or piece of paper and put it around the box - Frihed89 00:42:24 05/04/07 (4)
  - I need to label the actual tube - kellymon 12:45:39 05/04/07 (3)
    - The part I don't understand is re-branding them - Frihed89 08:48:11 05/05/07 (2)
      - I'm not trying to re-brand them...... - kellymon 10:11:53 05/07/07 (1)
        
        I doubt that you are "naive"...... - kellymon 12:50:13 05/07/07 (0)
- Re: I need ideas how to re-label tubes .... - Door Nail 20:48:04 05/03/07 (1)
  - Thanks! That's pretty cool. (nt) - kellymon 12:48:42 05/04/07 (0)
- Stencils - nightdoggy 18:13:54 05/03/07 (1)
  - Perfect! Another great idea - kellymon 12:52:02 05/04/07 (0)
Importance of matching? - Bard61 15:33:50 05/03/07 (3)
- Re: Importance of matching? - Bard61 01:49:08 05/04/07 (0)
- Re: Importance of matching? - zacster 18:10:18 05/03/07 (1)
  - Re: Importance of matching? - Bard61 19:40:05 05/13/07 (0)
7119 for 12AU7? - DAH 13:15:44 05/03/07 (11)
- Re: 7119 for 12AU7? - Mechans 18:14:12 05/03/07 (5)
  - What about - Frihed89 08:13:29 05/04/07 (3)
    - Re: What about - Mechans 18:46:20 05/04/07 (2)
      - You're right - Frihed89 08:11:45 05/05/07 (1)
        
        Re: You're right - Mechans 05:36:53 05/07/07 (0)
  - Re: 7119 for 12AU7? - DAH 00:34:22 05/04/07 (0)
- Re: 7119 for 12AU7 Different pin outs - snert 15:43:22 05/03/07 (2)
  - Re: 7119 for 12AU7 Different pin outs - Mechans 05:26:52 05/04/07 (1)
    - Re: 7119 for 12AU7 Different pin outs - DAH 14:34:38 05/04/07 (0)
- Carefully... - anumber1 14:47:39 05/03/07 (1)
  - Re: Carefully... - DAH 15:05:19 05/03/07 (0)
Are my ears not golden? - nightdoggy 13:13:36 05/03/07 (6)
- Ears and such... - Mando 20:00:19 05/03/07 (0)
- Re: Are my ears not golden? - anumber1 15:05:05 05/03/07 (2)
  - Ditto on the SEDs - kstagger 05:43:01 05/04/07 (0)
  - Good tip Al-thanks! - nightdoggy 15:48:30 05/03/07 (0)
- Placebo effect - unclestu52 13:41:19 05/03/07 (0)
- What I hear as the differences between SED KT88's and SED 6550..... - Chuck Y 13:37:51 05/03/07 (0)
Oops... - oocela 09:53:05 05/03/07 (2)
- Probably not - unclestu52 13:19:19 05/03/07 (1)
  - Re: Probably not - oocela 19:01:52 05/05/07 (0)
Does anyone know the difference between the Super TNT 845M vs the 845W? - eagertrader 17:31:44 05/02/07 (1)
- Re: Does anyone know the difference between the Super TNT 845M vs the 845W? - keremkucukaslan@yahoo.com 15:19:23 02/02/08 (0)
Shuguang 2A3C from eBay - david.world@yahoo.com 10:32:15 05/02/07 (2)
- Same story here, except just got them few days ago(nt) - JJ Triode 21:27:53 05/02/07 (0)
- Re: Shuguang 2A3C from eBay - sunseeker 11:08:43 05/02/07 (0)
How to adjust BIAS on Audio Research D150 / D160? - adnut 05:47:25 05/02/07 (2)
- Re: How to adjust BIAS on Audio Research D150 / D160? - Michael Samra 06:33:30 05/02/07 (0)
- Re: How to adjust BIAS on Audio Research D150 / D160? - Michael Samra 06:32:09 05/02/07 (0)
Tuberolling Quicksilver Phono stage - mitch s. 18:25:45 05/01/07 (5)
- Re: Tuberolling Quicksilver Phono stage - Mechans 04:30:24 05/02/07 (4)
  - Re: Tuberolling Quicksilver Phono stage - mitch s. 10:40:00 05/02/07 (3)
    - Re: Tuberolling Quicksilver Phono stage - Mechans 15:51:30 05/02/07 (2)
      - Re: Tuberolling Quicksilver Phono stage - LKDog 20:34:39 05/02/07 (0)
      - Shuguang - IdlerWheel 16:12:44 05/02/07 (0)
Are Pearl Tube Coolers still available? - nightdoggy 17:53:35 05/01/07 (2)
- A word of caution - starchild 17:41:24 05/03/07 (0)
- Yes at Parts Connection!(NT) - timb5881 18:01:46 05/01/07 (0)
TV-2 setting for testing 6550? - adnut 17:48:28 05/01/07 (1)
- Here is the setting for a kt88 but you can download them from bama k4xl - Michael Samra 22:29:05 05/01/07 (0)
6c6 vs.6d6 - alex 16:19:41 05/01/07 (2)
- Re: 6c6 vs.6d6 - Tom Bavis 06:18:54 05/02/07 (0)
- Re: 6c6 vs.6d6 - coresta 05:50:09 05/02/07 (0)
Replacing 7591's or 7868's with 6AV5's? - waldenpuddle 11:58:21 05/01/07 (9)
- Re: Replacing 7591's or 7868's with 6AV5's? - Eli Duttman 18:00:57 05/01/07 (3)
  - Re: Replacing 7591's or 7868's with 6AV5's? - henrybasstardo 18:47:30 05/03/07 (2)
    - Re: Replacing 7591's or 7868's with 6AV5's? - Jim McShane 13:00:57 05/05/07 (0)
    - Re: Replacing 7591's or 7868's with 6AV5's? - Eli Duttman 20:47:55 05/03/07 (0)
- Try 6GM5 - Alpha Al 15:09:39 05/01/07 (1)
  - The only problem, - sser2 15:29:00 05/01/07 (0)
- It can be done. - sser2 12:45:44 05/01/07 (2)
  - Thanks for the detailed info. I'll pass it on. - waldenpuddle 14:33:28 05/01/07 (1)
    - I haven't tried 6AV5. - sser2 15:25:17 05/01/07 (0)
0D3-max input voltage alone and in series? - wpod 11:45:34 05/01/07 (10)
- Re: 0D3-max input voltage alone and in series? - JB 10:32:45 05/02/07 (2)
  - Re: 0D3-max input voltage alone and in series? - wpod 19:54:53 05/02/07 (1)
    - Re: 0D3-max input voltage alone and in series? - JB 09:28:51 05/03/07 (0)
- Re: 0D3-max input voltage alone and in series? - Tom Bavis 08:21:33 05/02/07 (0)
- Question - lipmanl 12:26:16 05/01/07 (5)
  - Re: Question - wpod 03:50:47 05/02/07 (1)
    - Thanks for the answer - lipmanl 14:24:03 05/02/07 (0)
  - They are still in production. Allied electronics sells them. - Russ57 14:02:37 05/01/07 (2)
    - Thanks Russ, I've looked in quite a few... - wpod 04:39:00 05/02/07 (1)
      - Re: max input voltage - danlaudionut 12:46:09 05/06/07 (0)
TAD 12BH7A comparison? - Frihed89 06:22:42 05/01/07 (0)
6922 ID help - drsx 23:43:28 04/30/07 (12)
- Re: 6922 ID help - tango4@telia.com 00:53:09 05/01/07 (11)
  - Re: 6922 ID help - drsx 01:26:55 05/01/07 (10)
    - East German Rebrand? nt. - Mechans 04:29:04 05/01/07 (9)
      - Re: East German Rebrand? nt. - Steve M. 05:14:04 05/01/07 (8)
        
        Re: East German Rebrand? nt. - Jim McShane 06:36:48 05/01/07 (7)
        
        Re: East German Rebrand? nt. - Steve M. 19:31:06 05/01/07 (6)
        
        pic - drsx 23:05:47 05/01/07 (5)
        
        Re: pic - Steve M. 04:17:24 05/02/07 (4)
        
        Re: pic - Jim McShane 06:24:52 05/02/07 (3)
        
        As Mr. McShane said...... variations in the Tungsram tabs - tubemonger 10:39:44 05/02/07 (2)
        
        Re: As Mr. McShane said...... variations in the Tungsram tabs - drsx 11:44:42 05/02/07 (1)
        
        Re: As Mr. McShane said...... variations in the Tungsram tabs - tubemonger 14:15:55 05/02/07 (0)
Gas VR Tubes - Bobbyo 19:48:37 04/30/07 (2)
- Do you love them for cosmetics or performance vs. zeners? (nt) - lipmanl 07:24:51 05/01/07 (1)
  - Re: Do you love them for cosmetics or performance vs. zeners? (nt) - Bobbyo 15:33:48 05/01/07 (0)
Recommend prayers for the developers & producers of Vacuum tubes everywhere. - -3db 15:53:14 04/30/07 (17)
- My favorite bumper sticker " Lord Save Us from Your Followers"NT - JB 10:39:22 05/02/07 (0)
- Re: Recommend prayers for the developers & producers of Vacuum tubes everywhere. - gkargreen 12:08:52 05/01/07 (0)
- Re: Take care of yourself as well. - Mechans 05:00:24 05/01/07 (4)
  - P)S) thanks Mechan : great prayer! nt - -3db 13:54:07 05/01/07 (0)
  - May beings find themselves healed & renewed ever by the the power of music itself - -3db 13:53:18 05/01/07 (0)
  - That's not the point of Prayer. It makes us happier! - Frihed89 07:12:13 05/01/07 (1)
    - Great post, but a glass of Chardonnay helps... - Mike Burrows 20:25:24 05/01/07 (0)
- Nothing fails like prayer! nt - risabet 22:27:22 04/30/07 (0)
- I find this passage very comforting - Bambi B 17:32:27 04/30/07 (1)
  - Re: I find this passage very comforting - Bobbyo 19:43:50 04/30/07 (0)
- Plus prayer is fun. nt - -3db 15:53:46 04/30/07 (6)
  - God hates me (nt) - nightdoggy 18:36:03 04/30/07 (5)
    - The GOD I know does not hate anybody!!! (nt) - GBLPS 16:12:59 05/01/07 (1)
      - You should read the bible more often then - gd 08:21:07 05/02/07 (0)
    - Me too! - Mike Burrows 21:04:18 04/30/07 (2)
      - Look in the bright side - Frihed89 07:13:52 05/01/07 (1)
        
        Re: The LD 50 for a fall. - Mechans 05:09:58 05/02/07 (0)

Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.
Threads started on or before 2/15/07 are archived Here.

List of All Old Archives

Tubes Asylum

Post a Message!