In Reply to: RE: Recommend a good 10" 4 ohm midrange driver for under $150 for ESS AMT1 posted by RickHouTX on September 2, 2016 at 05:00:58:
Well, specs say 600 Hz. The orig. 10" should have no problem
getting there...check for old electrolytic capacitors, and just replace
them.
Also...I think the 10" uses a felt/fabric dustcap?. You can replace
those with a paper type that should help upper mid response.
You will see paper or aluminum caps on "extended range" woofers
(for a reason).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Recommend a good 10" 4 ohm midrange driver for under $150 for ESS AMT1 - Coner 07:03:52 09/02/16 (0)