In Reply to: Recommend a good 10" 4 ohm midrange driver for under $150 for ESS AMT1 posted by RickHouTX on September 1, 2016 at 16:02:01:
I'd start out with the usual suspects, Madisound, Parts Express, or Meniscus. The Madisound technical talk guys have probably seen this before.
I think your ESS speakers have a passive radiator. If so, you can tune the cabinet by adding or subtracting weight from the passive. Look for a woofer with roughly the same Vas as your cabinet volume, SPL, sensitivity, and Qts which will give you an idea of a woofer's suitability for use in a sealed or ported cabinets. (Your passive radiator is equivalent to a port.)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Recommend a good 10" 4 ohm midrange driver for under $150 for ESS AMT1 - Mr. Dick Hertz 16:49:05 09/01/16 (1)
- RE: Recommend a good 10" 4 ohm midrange driver for under $150 for ESS AMT1 - RickHouTX 17:06:41 09/01/16 (0)