|
Speaker Asylum General speaker questions for audio and home theater. |
|
|
|
Speaker Asylum General speaker questions for audio and home theater. |
|
Hello everyone. I am new here and this is my first post.
I have a pair of vintage Pioneer 811A 4 way, 5 speaker, bookshelf speakers. One has a damaged 12" cone type woofer (Pioneer ID# 30-735A), the other a damaged cone type 3" tweeter (Pioneer ID# 77-178f). The cab is an 8 ohm cab with a rating of 120 watts and a 30-22kHz freq response. The crossovers are at 1,300 Hz, 10 kHz, and 10 kHz. I attached the spec sheet for this speaker if that helps.
I put a multimeter on the woofer (removed from cab)and it measured 4.4 ohms. I did the same with the tweeter and it measured 6.2 ohms. Most replacements I've seen are rated at either 4 or 8 ohms.
That said, should I buy an 8 ohm replacement 3" tweeter and a 4 ohm 12" woofer? Is it that simple? Or, am I missing something? Thank you for any advice you can give me.
This post is made possible by the generous support of people like you and our sponsors:
Topic - How should I buy replacement speakers? - hawkhuff@comcast.net 10:01:23 11/04/15 (7)
- I used to own a pair &... - Brian McGowan 15:44:03 11/04/15 (1)
- Also try this place as well.... - Brian McGowan 15:47:53 11/04/15 (0)
- RE: How should I buy replacement speakers? - John Elison 15:22:40 11/04/15 (0)
- RE: How should I buy replacement speakers? - standingstones 15:01:42 11/04/15 (0)
- RE: How should I buy replacement speakers? - hawkhuff@comcast.net 10:03:16 11/04/15 (2)
- RE: How should I buy replacement speakers? - hawkhuff@comcast.net 10:04:07 11/04/15 (1)
- should I buy replacement speakers? - bare 16:12:34 11/04/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
