Home Speaker Asylum

General speaker questions for audio and home theater.

Not so easy fix

I've refoamed a dozen or more pairs of woofers over the years, and it's not hard but requires extreme patience, a steady hand, and ability to follow instructions to the letter. The most tedious part is the first -- carefully removing the old surround and scraping off ALL glue remnants from the basket and cone edge. Make sure you clean up ALL the crumbs and dust before the next step, removing the dust cap so you can insert the centering shims in the voice coil prior to gluing on the new surround. There are several companies that can either sell you the replacement kit or do the work for you for a fee. Parts Express in Ohio, Speakerworks in Oregon, and some outfit in I think San Diego are among them.

That being said, your damage may go beyond split surrounds, given your description of the distortion it now puts out. If the unfortunate bass blast bottomed out the voice coil against the backplate, the coil former itself could be bent, and the coil is scraping in the gap. This means the driver is FUBAR and must be replaced. First place to check is with the manufacturer of your speakers, see if they have any replacement woofers in stock. If that fails, get in touch with Madisound to see if they have any "close" replacements in their database.


This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.