In Reply to: RE: Can a simple crossover (cap/inductor) achieve time alignment without a stepped baffle? posted by jupiterboy on July 20, 2014 at 09:28:48:
Tom
Alignment requires the LF and HF signals arrive at the same time. The easiest way to get this is to off set the drivers in the baffle board.
If you are using an Altec 604 or 605, the drivers are fixed . So you need to time delay the Lf signals in the XO.
See my web site
www.donpatten@mac.com
Don
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Can a simple crossover (cap/inductor) achieve time alignment without a stepped baffle? - dlp4341 21:33:36 07/21/14 (2)
- Surely with a 1st order slopes you have to have the bass units forward of the mid/tweeter? - Timbo in Oz 21:08:55 07/23/14 (1)
- RE: Surely with a 1st order slopes you have to have the bass units forward of the mid/tweeter? - dlp4341 22:29:27 07/23/14 (0)