Home Speaker Asylum

General speaker questions for audio and home theater.

RE: Here we go again...

Hi,

You just cannot stop it, can you?

How about you have a look at the speaker, at the room it was measured in and how it was measured, before you again illustrate that you know little and assume much.

The Speaker incidentally has a 15" Woofer near the floor and an 11" at the top of the speaker at around 1.7m or so high... The room incidentally is only 5.5m in the longest distance, so around 3m listening distance is probably the max. that can be achieved...

No with 0.5m and 1.7m high drivers and 3m listening distance, what would be the cancellation frequencies from the path length differences?

And with a 8.5' high ceiling where would be the vertical mode and how would it be driven by these drivers? and what would be the result, if measured averaged over a reasonable width/hight window around the nominal listening position?

Ciao T
Thor

At 20 bits, you are on the verge of dynamic range covering fly-farts-at-20-feet to intolerable pain. Really, what more could we need?


This post is made possible by the generous support of people like you and our sponsors:
  Analog Engineering Associates  


Follow Ups Full Thread
Follow Ups
  • RE: Here we go again... - Thorsten 11:17:41 07/14/12 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.