|
Speaker Asylum General speaker questions for audio and home theater. |
|
|
|
Speaker Asylum General speaker questions for audio and home theater. |
|
In Reply to: Another Subwoofer Question posted by AudioSoul on May 18, 2012 at 07:18:13:
I don't think subs are hard to integrate, as long as you don't over do it. With a sub you can easily get too much of a good thing. New users tend to be heavy-handed with the volume control. You might consider an SPL meter like the digital meter from Radio Shack and a test CD with some pink noise on it. This makes balancing the outputs of the mains and sub(s) easier.
Any prospective sub should have a crossover network that cuts frequencies below a certain level to the left and right speakers. It should also have variable phase, frequency cutoff, and volume adjustments. Without these features, it's much more difficult to integrate your sub with the rest of the system. Being able to try a subwoofer in several locations is handy as well.
If you're going to buy a sub, see if your dealer will let you take home a demo unit or if they will offer a money back guarantee if you don't like it. Otherwise, DIY is a good alternative that can get you more bang for the buck. Parts Express has several kits with all you need.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Another Subwoofer Question - Mr. Dick Hertz 07:47:57 05/18/12 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
