|
Speaker Asylum General speaker questions for audio and home theater. |
|
|
|
Speaker Asylum General speaker questions for audio and home theater. |
|
In Reply to: Well, I'm going to guess... posted by The Real Dick Hertz on January 12, 2009 at 17:24:40:
....it seems as though you might have got something wrong somewhere...nevertheless, appreciate your help indeed.
I believe the following may be correct...and is in line with attached pic.
--------------------------------------------------------------
Note : in attached pic, red input terminal on the left, black, right.
Inductor connects from black input to the solder post, far left, top.
Capacitor goes from red input termnal to solder post, which is also tweeter blue lead connecting to the tweeter brown terminal, presumably (+), though I don't see it is marked so.
Other tweeter lead, black wire to tweeter white terminal, connects to black input terminal.
If you're sticking with the original filter, use a 4.7 uF metallized polypropylene cap.
Woofer connects across the input terminals, yellow wire (+) to red, and black wire (-) to black.
---------------------------------------
Later,
CR
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Thanks...but actually.... - Cyril R 07:13:09 01/13/09 (1)
- As I said, I was guessing... - The Real Dick Hertz 11:12:00 01/13/09 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
