I recently aquired an older 2W and am eager to experiment with integrating it into my system. I do have the WX-2 variable crossover, but no original documentation.
The current documentation for the 2Wq available from the vandersteen website says to use "the chart on the bottom of the WX-2" to set the dip switches. Sadly, there is no chart on my WX-2 (inside or out).
Pictures of the WX-2 I have are here:
http://www.vidya.com/kris/wx-2_top.jpg
http://www.vidya.com/kris/wx-2_bottom.jpg
I'm also interested in the possibility of building my own high pass filters with the InfiniCaps. I've seen some discussion of this in the archives, but no real information. Does anyone have pointers?
Thanks!
Kris
This post is made possible by the generous support of people like you and our sponsors:
Topic - Vandersteen 2W WX-2 settings? - KrisRoberts 21:26:20 11/12/07 (3)
- RE: Vandersteen 2W WX-2 settings? - KrisRoberts 12:56:08 11/14/07 (0)
- RE: Vandersteen 2W WX-2 settings? - tomw2 13:25:06 11/13/07 (0)
- RE: Vandersteen 2W WX-2 settings? - tomw2 13:24:03 11/13/07 (0)