|
Speaker Asylum General speaker questions for audio and home theater. |
|
|
|
Speaker Asylum General speaker questions for audio and home theater. |
|
In Reply to: Re: Water marks on Speaker Veneer... posted by painter27 on May 10, 2007 at 14:06:51:
The type of finish on the Mahogany veneer? Who knows? I bought the pair at the local goodwill store, and it seems to me ( but I'm no expert ) that it was just stained with something, and that's it. From what I can tell there was no protective top coat applied.What I did when I bought the pair was slightly sanded the surface with fine steel wool, then applied 2 coats of Butchers Wax. I just rubbed the wax on, let it dry, then buffed to a nice sheen.
The water mark/ring turned the wood a pale white color.
Would any of you try dipping a rag in laquer thinner or mineral spirits, rub the area where the mark is, let it dry out, sand, then buff with wax?????
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Water marks on Speaker Veneer... - stereophonic 16:02:56 05/11/07 (2)
- Re: Water marks on Speaker Veneer... - painter27 21:53:10 05/11/07 (0)
- See my post above... - DKL 18:24:03 05/11/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
