In Reply to: Film Bypass on Electrolytic vs. Polypropylene Cap posted by lukiedog on October 19, 2005 at 11:16:22:
The cap does in fact belong in series with the tweeter. You must be looking at the wiring wrong or it has been miswired. The cap should be at the positive input of the tweeter.
You can use a single polypropelene cap or use that and bypass it with a .1mf if you like. Most speakers with a 1st order, 6db x-over do not have sufficient resolution to make a bypass cap effective, although some do.
-Bill
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Film Bypass on Electrolytic vs. Polypropylene Cap - KT88 11:43:18 10/19/05 (4)
- Re: Film Bypass on Electrolytic vs. Polypropylene Cap - lukiedog 16:14:44 10/19/05 (3)
- Polypropylene Caps w/bypass - KT88 10:14:08 10/20/05 (2)
- Re: Polypropylene Caps w/bypass - lukiedog 12:11:26 10/20/05 (1)
- Tiny tweeter - KT88 17:14:16 10/20/05 (0)