In Reply to: The load the phono stage will see, almost certainly a resistor and likely a cap posted by bjh on August 16, 2015 at 15:21:19:
Not that odd. My line stage uses relays to switch inputs. No power, no relays engaged = open load. If that is the case, simply take a cheap RCA plug and solder a 10K or so resistor across it and plug into the output of the phono pre.
"It is better to remain silent and thought a fool, then speak and remove all doubt." A. Lincoln
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: The load the phono stage will see, almost certainly a resistor and likely a cap - JKT 16:34:03 08/16/15 (2)
- RE: The load the phono stage will see, almost certainly a resistor and likely a cap - bjh 17:28:04 08/17/15 (0)
- RE: The load the phono stage will see, almost certainly a resistor and likely a cap - andyr 18:22:16 08/16/15 (0)