In Reply to: Re: Asynchronous Reclocking in the DAC posted by Elso Kwak on January 11, 2002 at 06:48:30:
Hi All,
I am sorry this is a little confusing as the schematic on the DIYAudioforum is using the clock from the CDP transported by a separate cable to the DAC and it uses the Japanese IC's. I referred to it because it was a nice and clear picture and my idea is a important simplification and improvement of the original idea.
I don't use the clock of the CDP for the reclocking but a independent, stand alone, clock. This also means there is no need for the VHCU04. The two inverters are omitted in the schematic. The D-type flip-flops are just ordinary 74AC74's. And you don't have to make a extra connection from the CDP to the DAC!
You do need the stand alone clock of say 45 MHz. This is called the KWAK-OVERTONEclock and is directly connected to point CK in the schematic. In the schematic that I will mail to all who asked for it I will give a complete picture af all these circuit elements. From drizzling Holland,
ELSO
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Asynchronous Reclocking in the DAC, Clarification - Elso Kwak 12:42:25 01/14/02 (0)