In Reply to: RE: Thank you for that positive input, Dave. ... posted by Dave_K on January 27, 2015 at 10:59:36:
My problem is, my current setup is that my AKSA GK-2 hybrid preamp has 2 outputs:
#1 comes out after the main ss part of the preamp.
#2 comes out after the unity-gain tube buffer which follows the ss part.
The difference is:
* the tube output has some 'tube magic' - so ideal for mids and highs.
* but the tube softens bass transients, slightly - so bass drivers are better fed from the ss stage.
So I use output #1 (currently) to feed my bass drivers - and when I include subs, these will also be fed by output #1.
Output #2 feeds the mids & tweeters.
My reading of the HDP-4 specs suggested it can't cope with this scenario.
So, you suggested a good quality multichannel DAC like the exaSound e28. Can this be used as a substitute for the output DACs on the miniDSP? (It has 8 channels, so is exactly what I need ... if it is better than the intrinsic miniDSP DACs.)
Regards,
Andy
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Actually, Dave, a DEQX HDP-4 does *not* seem to work for me ... - andyr 03:20:25 01/28/15 (1)
- I don't understand what you want to do - Dave_K 05:56:50 01/28/15 (0)