|
Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it. |
|
|
|
Digital Drive Upsamplers, DACs, jitter, shakes and analogue withdrawals, this is it. |
|
In Reply to: MSB coax problem!!! posted by ralame on May 5, 2005 at 12:59:58:
Hi.I have an MSB Gold Link DAC with the P1000 Power Base. It is in a system I use in my home office.
The MSB requires that the input unit (CD,DVD) be turned on before turning on (connect the AC to) the MSB. If this is not done the MSB may not "link" to the input unit.
Sometimes, if you turn off the input unit (your CD or DVD player) and turn it back later, the MSB may loose this link and it requires turning off (disconnecting the AC of) the MSB and turning it back again in about 15 seconds or so. Note that the MSB is not supposed to be turned off and the input unit should remain on all the time as well.
Last, if you have the 96khz board installed you shoud check that the internal switch in the MSB is in normal mode and not in the MSB Network mode.
Good luck and happy listening!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: MSB coax problem!!! - Anton 12:10:20 05/07/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]