In Reply to: Re: 1/8" Teflon tubing works great for shield spacing for the JR Twists. posted by Cousin_Dupree on January 8, 2002 at 13:58:59:
John's recipe is pretty clear about the importance of spacing the shield away from the conductors and letting it fold into the creases of the twist. I found the 1/8" od teflon tube fit extremely well and the quad twist holds together very nicely. I have not tried to force the thing inside of a tube but i would suspect it is rather difficult. You can still make the twist under $5 a foot so a three foot pair cost less than $80 with decent locking connectors, $150 if you use the WBT crimps. I think it is not a bad deal.
dee
;-D
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 1/8" Teflon tubing works great for shield spacing for the JR Twists. - Penguin 15:52:18 01/08/02 (3)
- Re: 1/8" Teflon tubing works great for shield spacing for the JR Twists. - Cousin_Dupree 08:41:55 01/09/02 (2)
- Re: 1/8" Teflon tubing works great for shield spacing for the JR Twists. - Penguin 08:34:41 01/10/02 (1)
- Re: Got it! Thanks. - Cousin_Dupree 10:53:05 01/10/02 (0)