In Reply to: RE: Pinging Mr. Duster posted by Sondek on December 21, 2016 at 07:56:51:
I primarily suggested soldering the Audience OHNO wiring directly (twist the strands, tin, and bend to fit) to the lugs of the Oyaide IEC inlet. Trying to crimp the Oyaide Fastons is a major chore as the metal is quite stiff....and why not eliminate another metal in the way of an easy, clean solder joint (on the lugs)?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Pinging Mr. Duster - alan m. kafton 14:31:03 12/21/16 (7)
- RE: Pinging Mr. Duster - Sondek 15:18:59 12/21/16 (6)
- RE: The problem.... - alan m. kafton 16:34:41 12/22/16 (2)
- RE: The problem.... - Sondek 10:54:35 12/23/16 (1)
- Exactly....keep us posted. - alan m. kafton 12:10:18 12/23/16 (0)
- is it possible to clamp and solder the tignt wires? (in a way the clamp can be removed afterwards?) nt - 4px=y 19:59:24 12/21/16 (2)
- tingt should be tight.. tight. nt - 4px=y 20:01:26 12/21/16 (1)
- sadly my 'moniker' 4px=y² fails each time to include the (²) and screws up any chance at modifying a post LOL nt - 4px=y 20:05:12 12/21/16 (0)