|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
|
|
Cable Asylum Interconnects, speaker wire, power cords. Ask the Cable Guys. |
|
In Reply to: 5 Pin Din cable - low volume / convert to RCA posted by Happychap on November 3, 2016 at 00:19:40:
First, as the other two posters have advised check on the phono input. Won't matter what you do with the cable if the phono input or stage is absent. I'm not familiar with your JVC - I guess it has a DIN input that you plugged the turntable into? If so, are you sure it's a phono input and not just a line-level input (for CD players, tape decks, etc)?Foe the cable, the best thing sonically would be to cut the DIN connector off the turntable's cable and replace with some decent quality RCA's. But there are plenty of inexpensive adapters too...
Edits: 11/03/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: 5 Pin Din cable - low volume / convert to RCA - bcowen 18:26:56 11/03/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
