In Reply to: Your Help With A Power Cord Is Needed. posted by thetubeguy1954 on June 20, 2015 at 07:29:55:
I've recently had excellent results with a DIY silver PC for my Esoteric K-01X. Each conductor is 8x 20awg dead soft .999 silver wire(for an effective gauge of around 11awg), pulled through 3/8" polyolefin heat shrink tube. The two silver conductors are twisted about 10 turns per foot. The silver twist is wrapped with an opposing spiral of two-conductor flat copper RadioShack Megacable speaker cable that serves as safety ground and partial shielding.
Cost is around $20 per foot plus Furutech rhodium/copper terminations. Sources are Rio Grande for silver and McMaster Carr for tubing.
In photo the silver cable is lying on top of Furutech Alpha 3-- which the silver one surpasses.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- DIY silver PC - Dave Garretson 11:37:35 06/20/15 (3)
- RE: DIY silver PC - fantja 18:57:21 06/20/15 (2)
- RE: DIY silver PC - Dave Garretson 08:27:51 06/21/15 (1)
- RE: DIY silver PC - fantja 05:19:46 06/22/15 (0)