I repaired an IC for a buddy-had to replace both ends but wire was ok.
Three pics-1st is stock end; 2nd is tab to break out & 3rd is how to hold wire to barrel. Looks distorted 'cause took pic thru large magnifying glass-solder is silver, not gold. Also removed screw to center pin, as original design was for stranded & this cable used solid wire, so soldered.
This post is made possible by the generous support of people like you and our sponsors:
Topic - for Elizabeth - driver 19:39:25 03/01/14 (1)
- RE: for Elizabeth - fantja 14:33:53 03/02/14 (0)