Cable Asylum

RE: DIY arm cable to replace Hexlink 5C

97.125.123.211

In Reply to: RE: DIY arm cable to replace Hexlink 5C posted by eduardoo on June 28, 2009 at 23:27:56

I will tell you what I did to my LP12. It is probably out of the question, but here goes. I replaced all the arm wire with 32 gauge silver wire in Teflon. I twisted the four wires together and terminated them at two RCA outs attacked to the rear of the deck. The part that is probably to radical is I removed the connection at the head shell and the din plug completely. So the wires run directly from cartridge to the RCA sockets. As you are well aware, the cable plugged into the din arm socket does deflect the arm board and hampers tuning. I have eliminated that problem.

Follow Ups:

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.