Home Cable Asylum

Interconnects, speaker wire, power cords. Ask the Cable Guys.

Re: Need connector rec. for fat (Lapis, 9.4mm OD) IC cable

Image: Furutech FP-110

As you have found, a lower-cost high performance rca connector that will fit a 9.4mm OD cable is not an easy task to find. Here's what I'll suggest rather than a 9.5mm Cardas SRCA or any WBT clone:

Furutech's FP-110 and FP-160 both feature a 9.3mm entry, and should fit a 9.4mm OD cable with a little finesse (a short wrap of Teflon plumbers tape around the end of the cable jacket should do the trick). While both are a bit more expensive than your desired price point, I think either connector would be worth the extra expense. The FP-110 features a PCOCC center pin while the FP-160 features a eutectic cast brass center pin. I think the additional cost involved for the FP-110's PCOCC center pin feature is well worth it. The similar design but non-locking version FP-126 (7.3mm entry) also features a PCOCC center pin and is my favorite big bang for the buck rca connector, and worthy of the finest cable, IMHO.

---

Furutech FP-110 product link:

http://www.furutech.com/produ_2.asp?ProdNo=97

Furutech FP-110 seller’s link ($18 each = $72 set of four):

http://www.soniccraft.com/products/connections/rca/plug/furutech_fp110.htm

Note: Harmonic Technology Truth-Link interconnects terminated with Furutech FP-110 rca’s:

http://www.harmonictech.com/products/truth_link.html

---

Furutech FP-160 product link:

http://www.furutech.com/produ_2.asp?ProdNo=99

Furutech FP-160 seller’s link ($13.75 each = $55 set of four):

http://www.av-outlet.com/en-us/dept_377.html


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups
  • Re: Need connector rec. for fat (Lapis, 9.4mm OD) IC cable - Duster 05:31:11 12/09/06 (0)


You can not post to an archived thread.