I am hoping to get some new monoblock amplifiers soon.
(Well, new to me, as I will be buying them used on Audiogon.)
They will be 200+ wpc.The problem is that I need to get some custom made power cords as one of the amplifiers will be about 8-9 feet from my dedicated power outlets. (Typically the stock cords are only 6 feet long at best.)
Therefore I figure I will get need to get two, 3 meter, power cords made. (I don't have a balance control on my preamp, so I want to balance everything as much as possible.)
Since 3 meter power cords don't show up used very often, and rarely, if ever, do they come up in pairs, I think I am stuck buying new PCs.
Question: Without breaking the bank, what power cords will not limit my dynamics on my amplifiers?
(If you can I would like two options, one for power cords under $500 for the pair and one for power cords under $1,000 for the pair.Thanks for any advice you can give.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Inexpensive Power Cords for high power Amp's - Raiderman 20:21:29 09/05/05 (9)
- Re: Inexpensive Power Cords for high power Amp's - kbuzz 13:59:19 09/08/05 (0)
- Try VH Flavor 4's - Justlisten2 06:12:23 09/08/05 (1)
- Okay, I will check these out. Thanks! -nt - Raiderman 13:51:12 09/08/05 (0)
- how about DIY? - sas 22:43:50 09/06/05 (1)
- I am not a DIY type of guy - Raiderman 13:50:17 09/08/05 (0)
- Spend $30 on 2 of these 3M PCs to get your amps running and then LATER... - jeffreybehr 22:23:38 09/05/05 (3)
- Thanks for the suggestion - Raiderman 13:47:08 09/08/05 (0)
- Agree. - Al Sekela 13:03:47 09/06/05 (1)
- Thx, Al. The last time I recommended these as good-quality, enty-level PCs... - jeffreybehr 14:03:28 09/06/05 (0)