|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: 159ZA chokes ... posted by deathtube 667 on January 17, 2017 at 08:19:58:
no it wasn't flywheel, although I experimented with that then also.
seems like I Was using the 159 as input choke, followed by 50uf, then a triad c40x, then 50uf, then another triad c40x...
it worked well... around that time jeff started telling us that 3 LCs was bad so I started reducing.
my recollection is that with 80mA and a KT120 in an SE amp that "LSES" wasn't clean enough.
my current main rig is l-critical choke input class A push pull... with ~ 700uF of film caps... big heavy choke, too much capacitance, wrong wire in single runs, constant current sinks, cree diodes, the jeff anti-thesis... ;)
have to build both sides to compare after all!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: 159ZA chokes ... - rage 08:42:09 01/17/17 (5)
- RE: 159ZA chokes ... - drlowmu 09:21:18 01/17/17 (1)
- RE: 159ZA chokes ... - rage 09:29:30 01/17/17 (0)
- RE: 3 LC section filters ... - deathtube 667 09:19:52 01/17/17 (2)
- RE: 3 LC section filters ... - drlowmu 19:12:38 01/18/17 (0)
- RE: 3 LC section filters ... - rage 09:24:06 01/17/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
