|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: UF1007 vs UG1007 posted by Eli Duttman on October 18, 2016 at 12:48:50:
A quick (not exhaustive) check of the characteristics suggests they are indistinguishable from each other at low currents. If they are germanium then they should have lower voltage drop, but both are rated for 1000 volts and 1 amp, which doesn't sound like germanium to me, especially in a DO-41 package. But I'm not familiar with germanium diodes above the little signal-level ones.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: UF1007 vs UG1007 - Lee of Omaha 13:22:27 10/18/16 (3)
- Schematic? - gusser 10:45:14 10/19/16 (1)
- The 10B uses a plethora of the "UG" diodes... - Steve O 11:26:45 10/19/16 (0)
- "Lee, unless the demod diodes have failed, leave them be." - FenderLover 18:02:17 10/18/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
